Deep learning toolkits basically have two modes of operation: the CPU way, and the proprietary NVIDIA way. There is no point to putting an AMD chip in a machine you hope to use for deep learning.
Some toolkits may go through the motions of supporting AMD via OpenCL, but that's not going to be the case that they make sure works well, or works at all.
This is a problem, as NVIDIA is awful at maintaining drivers, results are being published based on "well, my NVIDIA black box decided to do this", and it contributes to deep learning veering toward a local maximum. But specifically choosing to do deep learning with an AMD chip is a pointless sacrifice.
What piece you would have use? Why? What tradeoffs you have considered?
You sound expert in the field, try to share your knowledge with the community in a constructive way so that we can all benefit from it.
I develop software for living and still I haven't any clue of what you said, while I followed quite well the article and I thought he was making reasonable choice.
Please show me better.
As the articles author himself questions, he should have gotten the marginally more expensive CPU, and definitely the GPU with more RAM.
* The overclockable CPU doesn't just mean that you very easily could get a 10%+ performance boost without much work, but also that you often (depending on your specific chip) can lower the voltage and make it run much cooler/quieter, which is something I increasingly care about if I'm using it a lot.
* He writes that fitting the model in RAM is basically the most important part, but then saves less than a dinner out by basically halving the RAM on the GPU he bought. The chip is otherwise the same though, so performance is only dependent on whether you fill that RAM or not.
* The Noctua D15 the parent mentioned is a CPU cooler where Noctua is a long standing high performant brand, and D15 is a specific model with a 15 inch fan and comparable sized heat sink. There are of course other brands, but I myself also usually end up with Noctuas. The reason it's important is that however fast you can dissipate heat from the cpu/case, the less chance of throttling, and the larger headroom for potential overclocks you get.
Airflow and room for larger heatsinks is also why he recommended not going for an ITX. A linked benefit is again the potential for a quieter system.
I haven't gone much into ML (yet), but I currently have a system with:
* I7 6700K (the difference to I5 6600K being higher base clock and hyperthreading, which is more important to computational work than to gaming, so if you have the money, definitely go for the I7)
* 32GB DDR4 (as author mentioned, RAM is cheap). The clock/timings on RAM isn't really as important, but try to find the best you can find for a given price point.
* An Nvidia GTX 1080: It's not Titan X or Z, but almost, at less price. It definitely blows the budget for a $1000 system, but I agree that the entire 10 series is good.
If the limit is a firm $1000, I would get something like this:
https://pcpartpicker.com/list/XHV9Fd
And if more funds is available, I'd get more storage and RAM, then a better CPU, then a better GPU, then maybe bump the chassis up to an R5 (same brand), possibly another motherboard. In that order. There's always something better, so you compromise based on budget.
I'm tempted in build a hackintosh:
https://www.tonymacx86.com/threads/hackintosh-cutting-edge-k...
- Intel i7 Kaby Lake - No decided on motherboard. The one that cause me less trouble (for hackintosh) is fine. - GTI 750ti (have) or buy a pascal nvidia. - NVMe drive if possible - 32 GB RAM. - Probably a Thermaltake CORE P3 case. Not decided.
I was thinking in use a Liquid Cooler but wonder if the Noctua could be better/less noise?
Depends, is your option of water cooling an All-In-One-solution that have become popular in recent years? Their performance is on par or slightly better than a large heat sink + large low speed fan(s), but they're not generally quieter, as you still have fans for them, as well as a pump.
I considered those options when building mine too, and as I wans't too enthusiastic about assembling my own water cooling system, I went for a large air cooled heatsink instead (the D15). No risk of leakage or pump failure, and proven performance/low noise.
However, I wish to have a quiet system, and my brother have it and it sound louder than I wish. I don't plan on overcloking.
http://www.anandtech.com/show/5054/corsair-hydro-series-h60-...
The "Silver Arrow" is an air cooler from Thermalright that is pretty equivalent to a Noctua or a Phantek or be Quiet! etc.
In that review it beats the H60 in both temperature and noise. The H60 is more than twice as loud.
So yes, unless you assemble your own water cooling system, I'd say definitely go for a regular heatsink+fan.
I would be interested to see what other people are using for their setups, and how that can differ for things like high-resolution style transfer or generic neural networks, etc...and at what point they have to switch from geforce/quadro cards to tesla.
It's been great sshing in from my laptop, submitting a job that completes far more quickly and keeping my laptop cool.
Yeah, it's supremely fast, my only regret is not having enough time to do something fun with it. For work I'm stuck with the clients platform approved machine, which is not what I would've picked. Tough to complain, but if I'm ever between contracts, I'll likely get into some fun project.
Don't lose 5 percent of your cpu overclock or more by having an itx friendly cooler instead of a D15 noctua or better.
Choose your video card wisely, AMD does some things better than NVIDIA depending on what software you're running.
If you chose an ITX platform for deep learning fun, uh, you should really add the couple shoeboxes extra space to your platform and have 4x-7x the power available to upgrade into.