News for hackers. Stuff that matters.
Re:Raspberry Pi 3 based home automation with Node.js and Rea... by haroldp on Thursday January 26, 2017 @01:23PM (#13493811)
I too replaced my dying PoS Rainbird irrigation controller with a raspberry pi and a relay board.

> With cron, I can schedule things however I want!

Wait, are you not using sprinklers_pi[1]? I highly recommend it.

I have more home pi/arduino/IoT projects coming up, but I am thinking it's going to be a lot of work integrating them. I'd like one home app/page that integrates them all.

1. https://github.com/rszimm/sprinklers_pi/wiki

Re:Raspberry Pi 3 based home automation with Node.js and Rea... by jon-wood on Friday January 27, 2017 @03:10AM (#13498416)
For the integration side you should take a look at http://home-assistant.io - they support a huge variety of hardware already, and almost every type of device includes a configurable MQTT adapter if you're building your own.

Once your hardware is integrated with Home Assistant it can handle automating things. The whole system is a big state machine so most automations will involve reacting to state changes and sending commands to other devices in response.

Re:Raspberry Pi 3 based home automation with Node.js and Rea... by krzyk on Friday January 27, 2017 @10:25AM (#13500289)
If it is only for irrigation of anything not grass, why not use off the grid system like blumats (http://blumat.com/en/)? You only need to provide it with a water source.
Re:Raspberry Pi 3 based home automation with Node.js and Rea... by kzisme on Thursday January 26, 2017 @02:27PM (#13494432)
What did you dislike about your Rainbird system ?
Re:Raspberry Pi 3 based home automation with Node.js and Rea... by twothamendment on Thursday January 26, 2017 @06:34PM (#13496428)
I installed my own sprinklers and drip - 22 zones of it. A Rainbird controller was going to be nearly $300. I went with a pi and loved it. Then came the real problem - I put the home on the market and ended up replacing my pi with a rainbird for the next people. Why? I kinda wanted to keep my setup and buyers didn't know what to think of it.

After I swapped it out I missed quite a few things - controlling it from my phone, from home or remote, being able to pull up a graph and see how long each zone ran. I wasn't in the mood to get up at 3am to see if the rainbird was working so I crossed my fingers and hoped it would work at least until the house sold. Setting up all my zones was a lot faster on the pi than it was with cranky dials and buttons on the rainbird. I won't miss it.

Re:Raspberry Pi 3 based home automation with Node.js and Rea... by haroldp on Thursday January 26, 2017 @03:46PM (#13495101)
1. It didn't work reliably

2. The UI was awful and buggy

3. It finally broke outright and replacements with halfway modern features were pricey