Re:A Peek at GNU Radio’s Buffer Architecture
by femto on Sunday January 15, 2017 @09:22PM
(#13407855)
It is practical, but it's important to have the core of your code optimised. In particular, you will need a very tight "multiply-accumulate" loop, as typically used in an FIR filter.
By way of real-world example, a 9600 bps P25 transceiver (with FEC) can be done on a C5500 DSP (200MHz) with about 10-20% CPU utilisation. As a further illustration, a vocoder that could not run in real-time was reduced to 5% CPU usage when a correlator (a single MAC loop in C) was replaced with the equivalent assembly that used a MAC instruction. 97% of the CPU time was being spent in that loop.
Re:A Peek at GNU Radio’s Buffer Architecture
by ChuckMcM on Sunday January 15, 2017 @09:10PM
(#13407819)
I run a HackRF One on an i7 (Intel NUC) and it is hard to peg the Cores. Typically when I do it is because some synthetic workload is dumping infinite work into the buffers and so everything is running full on, but generally real signals have been 20 - 30% of one or two cores.
Re:A Peek at GNU Radio’s Buffer Architecture
by kalleboo on Monday January 16, 2017 @01:27AM
(#13408519)
Weren't Winmodems handling 56K v.92 fine on much older hardware? Or did they still have more work offloaded onto the hardware?
Re:A Peek at GNU Radio’s Buffer Architecture
by slededit on Tuesday January 17, 2017 @08:18PM
(#13423197)
They had an analogue front end to reduce much of the load.
Re:A Peek at GNU Radio’s Buffer Architecture
by xioxox on Monday January 16, 2017 @04:17AM
(#13408967)
Here's a practical example of SDR to make a powerful radio telescope: https://en.wikipedia.org/wiki/LOFAR
Re:A Peek at GNU Radio’s Buffer Architecture
by jcims on Sunday January 15, 2017 @09:14PM
(#13407824)
Something's terribly wrong with your flowgraph.
Re:A Peek at GNU Radio’s Buffer Architecture
by madengr on Sunday January 15, 2017 @09:29PM
(#13407878)
I suppose it depends what you mean by practical. I use GR to simultaneously monitor several NBFM channels, and also for HF comms. SDR will probably never have the speed of dedicated hardware, or the power consumption of low power analog circuitry. But SDR definetly has it's place, and can outperform many classic architectures if power is not an issue.
You may find this SDR LTE eNodeB interesting: http://bellard.org/lte/
There's also this open-source LTE library: https://github.com/srsLTE/srsLTE
Re:A Peek at GNU Radio’s Buffer Architecture
by viraptor on Sunday January 15, 2017 @08:34PM
(#13407692)
Any other prefiltering / post-processing? This processing should be pretty trivial on its own. This should be fairly easy load - definitely not pegging the CPU at 100%.
Re:A Peek at GNU Radio’s Buffer Architecture
by nikanj on Sunday January 15, 2017 @09:21PM
(#13407848)
Core 2 duo was released in 2006, is it as bad on anything from this decade?
Re:A Peek at GNU Radio’s Buffer Architecture
by cushychicken on Sunday January 15, 2017 @10:39PM
(#13408061)
Most of the principles at work in SDR are integral parts of every 802.11 radio.
My core 2 duo was 100% cpu utilization simply from decoding 56kbps 2-BPSK, even with SIMD extension enabled (within GR).