News for hackers. Stuff that matters.
Re:The dream of Ara: Inside the rise and fall of Google’s mo... by nine_k on Tuesday January 10, 2017 @10:40PM (#13371564)
In a PC, you have plenty of room for interconnect. A system board can easily dedicate 25% of the area to PCI slots, and another 25% to CPU and RAM slots. A typical chassis has plenty of empty space, for air cooling if for nothing else.

A phone has nearly zero empty space. It has to be very compact, especially thin, it has to have a large battery, a large screen, and powerful chips. Also consider things like antennas, microphones, speakers, usb and headphone connectors that cannot be made smaller than physics and standards dictate.

A phone has no room for connectors between major components that would be remotely convenient for the user. Many connectors, is placed in accessible ways, would also work against mechanical strength. Good connectors that won't break after 2-3 reconfigurations, aren't cheap. Thus a phone with connectors will need to be significantly larger and heavier, and also costlier.

The PC argument does not work with mobile devices. At best, major components, like radio interfaces board, or a screen, or a battery can be made standardized and user-replaceable, likely requiring tools and skill. Batteries are easiest, but even these are far from standardized, and there are little incentive for manufacturers to work towards this. Users are content with glued-in batteries anyway.

There are no comments on this comment yet.