News for hackers. Stuff that matters.
Re:My Mechanical Keyboard by perryh2 on Sunday October 30, 2016 @02:43AM (#12828501)
Re:My Mechanical Keyboard by Skunkleton on Sunday October 30, 2016 @03:09AM (#12828556)
I am typing on one of those right now. I love mine, it is just like the model m, but it has a windows key and USB.
Re:My Mechanical Keyboard by agret on Sunday October 30, 2016 @03:38AM (#12828624)
Does it come with a PS2->USB adapter so you can connect it via a PS2 port? Better input handling than USB :)
Re:My Mechanical Keyboard by wolrah on Sunday October 30, 2016 @12:41PM (#12830717)
> Better input handling than USB :)

A common misconception. The USB HID Keyboard Boot Protocol, aka the lowest-common-denominator mode, is very limited and is where this belief comes from. 6KRO + modifiers, limited refresh rate, etc.

This mode is only required for compatibility with certain BIOSes and pre-USB operating systems, though some "gaming" keyboards start in this mode and only switch when they've been twiddled by their driver because a subset of those certain BIOSes won't even boot properly with a keyboard that goes beyond the boot protocol connected.

When booted to a remotely modern OS that has a full featured HID Keyboard driver it can support NKRO, up to 1000Hz refresh rates, etc. and as far as I'm aware is able to match or beat PS/2 in all ways.

Re:My Mechanical Keyboard by petepete on Sunday October 30, 2016 @03:59AM (#12828653)
You can buy PS/2 versions of most models directly.
Re:My Mechanical Keyboard by cm3 on Sunday October 30, 2016 @07:59AM (#12829315)
In cases where there is no PCB with PS/2, do you know if the adapter when connected to PS/2 has the exact same behavior or are is it a lesser/compatibility mode without the full benefits?

Anytime I sit at a machine where the USB chip happens to reset, I wish it would use PS/2. It's just not the same, and I'm not even using n-key-rollover.

Re:My Mechanical Keyboard by cm3 on Sunday October 30, 2016 @07:56AM (#12829303)
IBM used to make tenkeyless Model M's, wish Unicomp would offer the same since I'm very used to having the mouse closer to my hands. Then I could give a Model M a serious try, having used Cherry MXes for two decades, with the occasional one day excursion on a Sun or HP workstation keyboard.
Re:My Mechanical Keyboard by regularfry on Sunday October 30, 2016 @09:44AM (#12829744)
I'm right handed, but I mouse with my left for precisely this reason. Switch back to my right for gaming, but that's pretty rare these days.
Re:My Mechanical Keyboard by saundby on Sunday October 30, 2016 @08:03AM (#12829328)
I got the Unicomp with the trackstick mouse for quick mouse actions, then I reach over for the real mouse for longer uses of it, but I'm with you on wishing for a tenkeyless. Toshiba and Lenovo sold me on the mouse stick in the 90s, so it still feels natural for some things & my hand doesn't have to travel far, but nothing beats a real mouse.
Re:My Mechanical Keyboard by cm3 on Sunday October 30, 2016 @08:10AM (#12829344)
I tried and failed to get comfortable with thinkpad trackpoints, so if it's anything like that, I'm afraid it will just sit there unused.
Re:My Mechanical Keyboard by digler999 on Sunday October 30, 2016 @11:31AM (#12830310)
you can get a 10-keyless Daskeyboard for $99

http://www.daskeyboard.com/daskeyboard-4C-ultimate/

Re:My Mechanical Keyboard by cm3 on Sunday October 30, 2016 @12:54PM (#12830790)
I have tenkeyless cherry mx keyboard already, but I know there have been tenkeyless model M's in the past, which is what I was interested in.
Re:My Mechanical Keyboard by hossbeast on Sunday October 30, 2016 @10:52AM (#12830097)
I wish there was an ergonomic/split version
Re:My Mechanical Keyboard by Steeeve on Sunday October 30, 2016 @02:10PM (#12831257)
I've been eyeballing one of these for christmas: https://ergodox-ez.com/collections/keyboard-bundles/products...
Re:My Mechanical Keyboard by gnicholasgreen on Sunday October 30, 2016 @09:24PM (#12833637)
I took the dive on an ergodox ez a couple of months ago. It took me nearly a month to get fully comfortable with it, but now typing on a regular keyboard just feels less than ideal. I just ordered a second one for my home computer.
Re:My Mechanical Keyboard by brokenmachine on Monday October 31, 2016 @11:19PM (#12843099)
I absolutely love my Ergodox!

I can't type on a horrible staggered keyboard anymore. Once you get used to it (about a week for me), it just feels so natural. I can never go back. Staggered keys are perverse, all the contortions necessary just to locate the keys with your fingers.

The only problem is that now I look like a total retard when trying to use anyone else's keyboard, which is a pretty regular occurrence unfortunately as I'm in IT.

Re:My Mechanical Keyboard by hossbeast on Tuesday November 01, 2016 @12:17AM (#12843398)
Is it wireless, both between halves, and to the pc? Strangely I don't see anything about it on their site, but the pictures do not show any wires
Re:My Mechanical Keyboard by brokenmachine on Tuesday November 01, 2016 @06:16PM (#12850588)
No, it has wires both between halves and to the keyboard.
Re:My Mechanical Keyboard by Steeeve on Monday October 31, 2016 @09:04AM (#12836311)
Question - did you go with the default blank keys? And how do you like them? I'm trying to figure out which keys to get, but I have yet to see one in person.
Re:My Mechanical Keyboard by hossbeast on Monday October 31, 2016 @07:34PM (#12841950)
Also, is it wireless?
Re:My Mechanical Keyboard by hossbeast on Monday October 31, 2016 @01:22AM (#12834462)
Wow, thank you for pointing this out, it looks fantastic. Christmas, indeed ...
Re:My Mechanical Keyboard by brokenmachine on Monday October 31, 2016 @11:42PM (#12843207)
Also check out the Ergodox Infinity from Massdrop at https://www.massdrop.com/buy/infinity-ergodox , for the next 7 days at $200 but you'll have to do the assembly yourself.
Re:My Mechanical Keyboard by hossbeast on Tuesday November 01, 2016 @10:24PM (#12851830)
How concerned about the soldering part should I be, if I have no DIY assembly experience? I've never used a soldering tool (gun?)
Re:My Mechanical Keyboard by brokenmachine on Wednesday November 02, 2016 @06:47PM (#12860091)
I'd say you should have a little practice on a board that you don't care about first, just get a protoboard and some resistors and have a go. Check youtube for basic soldering beginner videos, if only to see how long you should be heating the pads for. If you leave the soldering iron on the pads for more than, say, 7 seconds, you can lift the tracks off the board and that'll be a problem.

I'm pretty sure the surface-mount parts are already done for you on the Infinity Ergodox, switches are just about the easiest things to solder because they're quite large and the pins are far apart.

So yeah, shouldn't be too hard, and you'll have a sense of achievement when it's done! I love using a keyboard that I've assembled myself.