Remove the ?amp=true from the URL and you'll get the proper desktop version.
If you were going to do this, you wouldn't swap wings. Instead, you'd swap passenger compartments in and out of various airframes, probably with some kind of automated gantry. This would reduce airfield turnaround times by allowing boarding to be finished before deplaning begins and by removing baggage handling from the critical path of getting the plane back in the air. Then the batteries would be charged during maintenance on the tarmac or in a hangar. Though overall I'm a skeptic of electrical aviation.
I can see short haul, lower speed routes working with less radical battery approaches. Probably have to have multiple battery locations per plane for weight and balance.
I'm incredibly sceptical of SST and replacing Concorde.
Airports don't have unlimited apron space and the costs are pretty high the apron costs for LGA for examples are:
For the first 15 minutes or fraction thereof $ 50.00 For each additional 15 minutes or fraction thereof $100.00
source: http://www.panynj.gov/airports/pdf/scheduleofcharges-lga.pdf
And even with these charges apron space is still a "premium" and it's not designed to be constantly used (this is why airlines usually have a home airport where they can actually reserve space).
That works out to approximately 1GWh. At $0.10/KWh divided by two because of worse efficiency, that's $50,000 worth of electricity.
So the electricity at $50k costs more than the $40k for gasoline. (Or about the same depending on the exact price.)
The bigger issue is a 90 minute recharge of .5GWh would require 333MW of power, which about half the total output of a typical power plant. i.e. not a chance in the world of that happening.
Can you imagine just grabbing the power lines on a typical power plant and plugging them in here and there?
An electric plane wouldn't need as much energy as a fuel burning jet because you only need to be turning the fan blades. Where a jet loses a lot of energy compressing the air, a electric jet would probably be more like a propfan or a ducted fan. The best jets are about ~35% efficient at turning energy in to forward speed. Assuming an electric motor is 80% efficient and the propulsion is 80% efficient, you'd be looking at 64% efficiency.
It's possible there are other factors reducing the efficiency of an electric motor, but I doubt they are worse than parity with the existing jets. Using your numbers, that means an electric plane would use $25,000 worth of electricity.
The typical plant outputs much more than 333 MW as well. As we move toward less fossil fuel use, infrastructure will better support our increased energy usage. When internal combustion engines were first introduced, someone easily could have said "Do you realize how many billions of gallons of fuel it will take to power all of that? Not a chance in the world of that happening!"
The state I live in has well over 100,000 MW of generating capacity. Given that scale, supplying energy to planes doesn't seem so ridiculous.
I'm willing to bet that we won't just be slapping electric motors in place of fuel turbines anyways. Plane designs will probably progressively move towards better suitability for alternative energy. Maybe electronic motors for extra energy during take-off, with enough reserve power for emergencies?
It does not loose energy from this. The compressed air expands afterward, returning almost all the energy.
> The best jets are about ~35% efficient at turning energy in to forward speed.
Where are you getting these numbers? I'm seeing much much higher numbers than that then I google it.
> Assuming an electric motor is 80% efficient and the propulsion is 80% efficient, you'd be looking at 64% efficiency.
Again, those numbers don't sound in the slightest bit correct.
> Using your numbers, that means an electric plane would use $25,000 worth of electricity.
What? Run your numbers again. I assumed 50% efficiency for Jets and 100% for electrical.
> The state I live in has well over 100,000 MW of generating capacity. Given that scale, supplying energy to planes doesn't seem so ridiculous.
It's not about the energy usage, it's about how do you connect the thing to an airplane. Do you plan to move cables the size of telephone poles? 100,000 volts?
Have you seen electrical substations? Does that look like the kind of thing you would put on an airplane?
My prediction is that you would need cooling for such large motors travelling at such high speeds and that too would drop your efficiency. The airframes get pretty got at those speeds and every electrical component with high power will generate it's fair share of heat too. You won't be able to keep the thing cool enough to fly for any period of time. I have MX Dynamixels sitting beside me that sometimes weld themselves shut because of the immense heat they generate. The bigger they are, the bigger the problem.
For now, the only viable method I see is low-speed, short journeys as somebody else suggested. Maybe these sorts of flights would be more viable where solar panels can be utilized to also work off some of that money and make recharging quicker and adding less weight.
See my post here: https://news.ycombinator.com/item?id=12591666 electrical costs are higher than typical fuel costs.
Looking at the accompanying text, there are some problems with his ideas. Some of that "supporting" material is also about fail-safe design and heat distribution. A copper plate running through the middle of a battery will draw the heat out nicely. These batteries are all good and well until they fail, at which point you have a huge problem. With fuel, you can dump it. What do you do with you battery wing?
One of the massive problems is energy density, but that's not the only problem. With the batteries embedded into the wings, you need you to figure out how to effectively charge them too. Planes can't afford to sit for hours on the ground between flights and swapping wings over is not going to fly with safety regulations very well.
The intentions are good but I'm not convinced there is something viable here.