News for hackers. Stuff that matters.
Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by cft on Wednesday September 21, 2016 @01:54AM (#12545744)
How did you test 2GB/sec? I have a Fusionio ioDrive2 1.2 TB card in a 32 core Xeon E5 server with 1600Mhz RAM and I get only 850MB/sec:

    # for i in {1..4} ; do ( time sh -c "dd if=/dev/zero of=/fusionio1/ddtest.$i bs=1M count=4000 oflag=direct" ) ; done
    4000+0 records in
    4000+0 records out
    4194304000 bytes (4.2 GB) copied, 4.90524 s, 855 MB/s

    real    0m4.908s
    user    0m0.006s
    sys     0m0.785s
    4000+0 records in
    4000+0 records out
    4194304000 bytes (4.2 GB) copied, 5.05399 s, 830 MB/s

Server has 128GB RAM and the card is in a PCIe 3.0 slot. Also FusionIO has 20PByte write endurance, which sandisk card obviously doesn't need.
Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by vardump on Wednesday September 21, 2016 @02:47AM (#12545938)
That's suspiciously low.

Some questions:

1) What happens if you use bigger block sizes, say 16M?

2) Which filesystem you're using? Can it be fragmented? Can you test with raw disk to eliminate any filesystem influence?

3) Is dd running on same NUMA node (CPU socket) as your ioDrive2 PCI-e link?

4) To expand on 3, is there chance for QPI saturation (traffic between CPU sockets)? Have you ensured all the software uses CPU local RAM whenever possible and not access other CPU socket's RAM?

5) Are you sure all PCI-e lanes are active? (Try lspci)

Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by mortenlarsen on Wednesday September 21, 2016 @06:22AM (#12546854)
Also: Did you low-level format to 4K blocks, or is is still using 512 byte blocks? Various options for the kernel module also have a significant effect, as do BIOS settings (C-states, etc.).

I got 2.5-2.9 GB/sec (iirc) with a FusionIO ioDrive2 Duo. It has been more than a year so I do not remember all the details.

Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by houk on Wednesday September 21, 2016 @04:23AM (#12546344)
Check the power status of the card. Make sure it's getting enough juice.

http://sirsql.net/content/2015/02/12/fusionio-and-the-go-fas...

Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by wazoox on Wednesday September 21, 2016 @02:12AM (#12545811)
Weird, even on an old PCIe 2.0 Opteron machine, I easily gets 1.4 GB/s from an HGST NVMe card. I've got 800 MB/s from a single SAS 12Gb SSD. Something's probably wrong in your setup.
Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by cft on Wednesday September 21, 2016 @02:15AM (#12545823)
How do you measure the write speed?
Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by wazoox on Thursday September 22, 2016 @10:44AM (#12557112)
Same as you, good ol' dd. Not using direct IO, though. But I'm watching at iostat while testing, and the results are coherent.
Re:Western Digital unveiled its SanDisk 1TB SDXC card prototype by kabdib on Wednesday September 21, 2016 @09:28AM (#12547929)
Nothing fancy, just multiple copies of large files at the filesystem level, making sure that the cache wasn't giving false results. The transfer rates and the I/O counters matched pretty well. This was on a vanilla Windows 10 workstation.

We run a bunch of these things, and regularly bump up against the PCIe bus limits. There's something going on with your setup.