News for hackers. Stuff that matters.
Re:10nm versus 7nm by _yosefk on Sunday May 01, 2016 @05:33PM (#11607954)
Adapteva has done chips for <$2M AFAIK, definitely <$5M, at 28 nm. Of course few chips are like theirs in terms of design simplicity relatively to their large size except for bitcoin miners. For $10M however you should be able to do pretty big designs with lots of licensed IP, heavyweight simulation acceleration etc. A breakdown of real projects involves violating NDAs.

Below 28nm their numbers become really deranged. This overstatement is IMO peddled by big name chip companies trying to convince analysts that FinFET nodes give them a moat. In reality the end of Moore's law means they'll face vicious competition.

Of course nothing prevents you from spending huge amounts of money. Buy an ARM architecture license - there goes $30M and that's before you pay for developing your own ARM-compatible CPU.

Re:10nm versus 7nm by adapteva on Sunday May 01, 2016 @09:27PM (#11608699)
Yosefk, thanks for pitching in and fighting the complete bs that gets flung around regarding chip design costs. Some of these projections are just ludicrous, clearly made by people who are not currently involved in chip design.

For argument's sake, let's pin the tapeout cost at $5M and EDA costs at $1M. Everything else is engineering. The reason these projects are expensive is that the chips are complex (because the have 10B transistors!). It has nothing to do with technology scaling (except for the fact that smaller nodes lets you integrate more transistors). I can design a memory chip (with repeating structures) in any node for almost nothing (..besides the tapeout cost). If they would have costs have escalated from $50K at to $5M at 14nm, that would be reasonable. The $250M number is utter nonsense....

Some more background:

http://www.adapteva.com/andreas-blog/semiconductor-economics...

Re:10nm versus 7nm by nickpsecurity on Sunday May 01, 2016 @09:46PM (#11608750)
The other comment to yosefk is mine citing your Lean Fabless article to contradict the point you just made slightly. Feel free to clarify on that if I'm misinterpreting something. Yet again, your next link supports "ludicrous" prices if it's a complex, full-featured SOC along lines of Apple products. Perhaps they should put qualifiers in these articles to be clear they're talking about high-end stuff with big numbers of parts and engineering required. If they even know what they're talking about.

Yet, two of your articles suggest me doing a Snapdragon or something without buying third-party I.P. or RTL could easily cost the numbers in the article on 28nm. Or the other nm. Intended audience of those big nodes will also mostly be companies making stuff like that where they can afford development costs. Do shuttleruns even exist for 16/14nm?

Re:10nm versus 7nm by nickpsecurity on Sunday May 01, 2016 @09:34PM (#11608714)
You're talking about this:

http://www.adapteva.com/andreas-blog/a-lean-fabless-semicond...

Adapteva is pretty clever. Yet, they don't tell us whether they reached $2 million at the 16-core model with 64 costing much more or if that was both. The write-up also says they used third party I.P.. It implies they outsourced as much stuff as possible. You can bet it was mostly standard cell rather than custom in those. They used the shuttle runs I often advocate which are available on their chosen nodes. Biggest part, they recovered this by selling to niche markets that didn't care much about price. Try that in mass market outside being Apple you will fail.

All quite different than doing a whole SOC by yourself on 28nm. They even admitted complex SOC's can cost big money:

"Complicated SOCs are indeed very expensive to develop and there are few if any examples of complete products that have cost less than $10M from start to finish. "

So, now we've shifted from $2mil to $10mil that quickly. Gotta wonder what in-house development of full SOC a la Snapdragon with bells and whistles at 28nm costs with only packaging or PCB's outsourced. Is it maybe $10-30 million? ;)

Re:10nm versus 7nm by adapteva on Sunday May 01, 2016 @10:04PM (#11608809)
We can't tell you the detailed costs because this would violate our NDAs, but until our 2011 28nm tapeout, we had raised less than $2.5M in capital and taped out 4 chips at 65 and 28nm.

There is no mystery here. EDA costs, tapeouts, engineering costs are all known. Tell me the chip you want to build, I'll tell you how much it will cost.:-)

People seem to have a hard time grasping that the term "SOC" is meaningless when it comes to predicting cost. It's like comparing the cost of a Ford Focus and a Ferrari. Sure they are both cars...

Re:10nm versus 7nm by nickpsecurity on Sunday May 01, 2016 @10:06PM (#11608817)
Thanks for the clarification. That's hopeful. I just gave you a sample question on cost in another comment. Even a range will be helpful when soliciting academics on it.
Re:10nm versus 7nm by adapteva on Sunday May 01, 2016 @10:27PM (#11608889)
I provided ranges in the paper. To focus in further, you will need to get actual quotes from vendors. This is because the price is completely opaque and depends on circumstances.

http://www.adapteva.com/andreas-blog/semiconductor-economics...

Re:10nm versus 7nm by nickpsecurity on Sunday May 01, 2016 @10:37PM (#11608915)
Oh damn. I figured it wouldn't be that easy. Thanks anyway as your write-ups have been helpful. I imagine the chip-to-chip interconnect might be, too, at some point. :)
Re:10nm versus 7nm by KSS42 on Sunday May 01, 2016 @10:34PM (#11608906)
Were your tapeouts shuttles or full production tapeouts?
Re:10nm versus 7nm by adapteva on Sunday May 01, 2016 @10:52PM (#11608966)
Until 2011, all of our tapeouts were shuttles. (for our initial market the per die cost was fine). You get 50 dies/wafer on a shuttle run and can order a lot of wafers...with a theoretical per wafer price of $5000 that would mean $100 die, which is not bad for some systems.

Full mask tapeout was done later.

Re:10nm versus 7nm by nickpsecurity on Sunday May 01, 2016 @11:07PM (#11609010)
What shuttle service did you use for 16 and 64 core development? Might help someone stay close to your cost profile. Btw, your data sheet for 64 core says 65nm, too. I thought it was 28nm or maybe I misread one of your posts. 16 to 64 core on same node would be nice. :)

And good luck with "The Brain." Saw that on your website just now. Funny that I was thinking of proposing to someone a prior product for revival that did NN's with 256 8-bit cores on 0.5 micron with good results. Then, ABC Thinking Machines Super-Connector had badass GA results back in the day with 64,000 simple cores. Your design looks like a Thinking-Machine-on-a-chip level of cores with cores being more versatile. Not 64-65k but close enough. :)

Re:10nm versus 7nm by KSS42 on Monday May 02, 2016 @05:00AM (#11610071)