My advise is still the same, though: put Gaisler's Leon3 SOC w/ key I/O on fab at 180nm-90nm using shuttleruns like Tekmos. Its been GPL with no action forever. Already has OSS software on it, too. SPARC compatible trademark only costs $99 if you wanted to be official.
So, if there's such a will or demand, where's our open-source SOC that uses Leon3? It's been one MPW, packaging, and PCB run away forever. Still don't have one...
Anyway, you know what I wanted: open-source, 28nm FPGA w/ key I/O already included so I could synthesize my own CPU's and such on it. Verify one design in hardware, worry about the rest in simulation. You never got back to me on that one. Whether it was a good idea to solve most people's open-hardware concerns or what it might cost?
(I'll say a Virtex-6 amount of slices or memories with USB 2.0, DDR3, PCI-E, SATA, and 10/100/1000 Ethernet onboard. Should do.)
Open source hardware refers to the silicon itself using open source designs.
[0] http://www.eecs.berkeley.edu/Pubs/TechRpts/2016/EECS-2016-1....
If we get to the point that TSMC has the same technology as Intel and IBM and it never changes then some hardware hackers will eventually publish something like a 250MHz processor that uses 10 watts on that process, which will be "good enough" for some embedded devices to justify a fairly large production run. Then you have a community and people make incremental design improvements for the same reasons Google and others do for Linux and in a few years the free hardware design is above 2GHz and below one watt.