News for hackers. Stuff that matters.
Re:10nm versus 7nm by thesz on Sunday May 01, 2016 @01:00PM (#11606895)
Moore law is about number of transistors per chip (IC). You can make transistors smaller, you can make chips larger, you can stack chips and you can make integrated circuits from several parts.

I think your feeling is wrong.

Re:10nm versus 7nm by speeder on Sunday May 01, 2016 @02:07PM (#11607175)
What you are saying is PRECISELY why Moore Law ended with 7nm.

Mind you, performance improvements didn't ended, we can still find other ways to do things...

But 7nm is the smallest physically possible transistor (well, theoretically it is 5nm, but that one can't be actually manufactured).

So, you hit 5nm, then what? Your only choice would be make chips larger... but if you do that, you limit your maximum clock (example: a 5cm processor, if it allowed data to travel at light speed, and had perfect cooling, would still be limited to 6ghz)

Or make them taller, but then you can't cool them easily.

That is the problem, Moore Law, as in transistors per chip, ended with 7nm, there is nowhere to go after that, the only thing you can do is add more chips and make them communicate with each other (ie: multi-cpu... see what AMD has been doing in their recent research, trying to figure how to make an API to allow infinite amount of GPUs in the same calculation in a way 100% transparent to the developer).

But making more chips is not improving Moore's Law.

The only thing that can be done now, is invent something else, silicon transistors are done for, you can't improve them much anymore, you can only change the tech (use something else other than silicon transistors) or find novel ways to use current silicon tech (better architectures, multi-chip systems, better code, etc...)

Re:10nm versus 7nm by SemiTom on Sunday May 01, 2016 @07:37PM (#11608349)
Intel has a roadmap down to 3nm, and I believe Imec does, as well. But the future is probably a combination of different packaging with faster interconnects and better throughput to and from a variety of memory types. There are a couple of ways to drop the heat. One is a different transistor structure, which may allow for a sharp reduction in voltage (0.1 or 0.2 volts vs. 0.7 to 3.5V). The second way is to use silicon photonics between chips in a package, which is coming one of these days.
Re:10nm versus 7nm by logicallee on Sunday May 01, 2016 @03:31PM (#11607529)
>Or make them taller, but then you can't cool them easily.

Haven't you answered your own question? Your other points are about impossibility - the one I just quoted, about making chips taller, is about difficulty.

If I were the head of Intel I would say "Well. Hmmm. All right. I guess we'd better start making them taller."

Moore's law is not a question of "how hard can it be". As you've pointed out, on the current approach it's a question of "It is physically impossible for us to increase transistor count without dropping the clock rate or moving out of roughly a plane. No thanks to Einstein. (My favorite link on this subject: https://www.google.com/search?q=c+%2F+4+ghz )

You say "Or make them taller, but then you can't cool them easily." Well then, make them taller and cool them with difficulty. Nobody said it would be easy. Off-hand you could:

-> Immerse the taller chip in insane cooling

-> Fabricate little duct work between layers and liquid cool at high velocity

-> Figure out a way to reduce heat waste usage, e.g.: different substrate, not silicon (pretty insane)

-> Possibly combining some of the above points, make it a superconductor.

These are insane ideas from me. But then again, I'm not the head of Intel and you've heard a few minutes of thought on me on this topic, where I'm not a chip designer.

"When you have eliminated the impossible, whatever remains, however [difficult], is your [roadmap.]"

Re:10nm versus 7nm by NegativeK on Sunday May 01, 2016 @09:50PM (#11608764)
Without getting into semantics, Moore's Law roughly assumes that things will get cheaper or you'll get significantly greater bang for your buck. "Nobody said it would be easy" is a casual dismissal of the fact that consumers won't pay for this, unless someone conjures a materials revolution.

And no, we can't just assume the head of Intel will conjure up a materials revolution solely to adhere to an industry observational law.

Re:10nm versus 7nm by logicallee on Sunday May 01, 2016 @10:42PM (#11608930)
I don't know, man:

https://en.wikipedia.org/wiki/Moore's_law#Moore.27s_second_l...

This talks about an exponential increase in R&D costs which is expected by Moore. With stuff like cloud computing, I don't see the need for denser and denser CPU's going away any time soon.

Re:10nm versus 7nm by thesz on Sunday May 01, 2016 @06:01PM (#11608060)
I've seen electronic microscope image of a working polar transistor in few dozens of atoms. Wires were couple atoms wide. The method employed for that scale was able to place about couple of hundreds of tungsten atoms per second.

It was in 2005. I lost contact with these people, I don't know how they do now.

Re:10nm versus 7nm by im3w1l on Monday May 02, 2016 @01:41AM (#11609386)
> a 5cm processor, if it allowed data to travel at light speed,

Easy. Just have multiple synchronized clock sources.

Re:10nm versus 7nm by yaantc on Sunday May 01, 2016 @04:21PM (#11607701)
Strictly speaking, Moore's original paper is not about transitors per chip but about transistors density for the least cost node.

So first it's about transistor density, hence the relation to having smaller and smaller transistor. And also and very important, it's about cost. You could go 3D to increase the amount of transistors per area, but that requires more masks/operations and impact the yield, and increases cost. If in the end the cost per transistor increases, then it's a density increase but it's not advancing Moore law.

In other words, Moore's law can be broken in two different ways: 1) we can't improve anymore the transistor density; 2) we can improve transistor density, but not in a cost effective way. If you want more you need to pay more (vs. getting more for less money when riding Moore's law).

Re:10nm versus 7nm by dmarcos on Sunday May 01, 2016 @01:14PM (#11606948)
If you care about miniaturization you can't make chips larger. If you stack chips you will have to deal with heat dissipation. What do you mean about making integrated circuits from several parts? I'm not an expert on IC design. The reality is that laptops have not increase performance in the last 5 years as much as they did before. Desktop GPUs are getting more powerful at the expense of being more and more power hungry. I feel that in the smartphone space the claim of "This new model is 2x performance of the previous one" will be harder to make.
Re:10nm versus 7nm by solnyshok on Sunday May 01, 2016 @03:33PM (#11607534)
re:desktop GPUs - AMD/NVidia stayed at 28nm for the last ~5 years. 14nm coming this summer to both.