News for hackers. Stuff that matters.
Re:Chernobyl's legacy 30 years on by jcranmer on Tuesday April 26, 2016 @01:18PM (#11573757)
I suspect the specific design flaw they're referring to is the graphite tips of the control rods, and the fact that, for the first few seconds of a SCRAM, the reaction rate is increased. And the control rods jammed in that position.

Yes, there was serious human failure in Chernobyl. But when the maximum emergency "oh shit" safety feature works by making things even more unsafe before shutting stuff down, that is the sort of design flaw that probably should be criminal.

Re:Chernobyl's legacy 30 years on by hga on Tuesday April 26, 2016 @03:31PM (#11574835)
The 2nd design flaw is the positive void coefficient due to it using light water as a coolant and graphite as a moderator. In its scheme, the light water is a neutron absorber, and if steam voids form in it, there's less water absorbing neutrons. More neutrons -> more split atoms -> more heat -> more/bigger voids, this repeats until the reactor sufficiently disassembles itself: https://en.wikipedia.org/wiki/Void_coefficient

Such designs are illegal in the US, one of the reasons all but the latest version of the CANDU reactor can't be used here.

Re:Chernobyl's legacy 30 years on by InclinedPlane on Tuesday April 26, 2016 @08:02PM (#11576816)
Yup. Means you can use lower enriched uranium since the reactor is primarily graphite moderated and merely water cooled (one of the most "efficient" designs possible), but it's unstable by nature and potentially very dangerous, as we've seen.
Re:Chernobyl's legacy 30 years on by InclinedPlane on Tuesday April 26, 2016 @08:00PM (#11576809)
Design flaws. Many of them.

1. Lack of a containment vessel for the reactor core. All western reactors have these, this is a big deal. It's not a cure all but it helps a lot.

2. High positive void coefficient for the reactor. This meant that as the reactor got hotter and/or was depleted of coolant the fission reaction rate went up. This is very super extremely mega bad. Most western reactors are designed with negative void coefficients so that they are more inherently passively safe. All RBMK reactors were retrofitted after Chernobyl to lower their void coefficient and tweak some other safety features to make them less insanely dangerous.

3. Graphite tips on control rods. This was the straw that broke the camel's back. Which took an "on the edge" reactor and tipped it beyond, which then exploded (in a literal nuclear explosion, most likely) and scattered debris across the entire world due to design flaw #1.

Keep in mind that the Chernobyl and Three Mile Island events were fundamentally of a similar character, it was the difference in design between the two systems that led to one being a minor "incident" with almost negligible radiation release and one being a catastrophe with global implications.

Re:Chernobyl's legacy 30 years on by sickbeard on Tuesday April 26, 2016 @01:29PM (#11573849)
OP is right the automatic system controlling the rods only had control over 12 rods. The others had been switched to manual. It jammed after the massive power spike causing the rods to fracture.

There were a long series of fuckups before they even got to this point.

Re:Chernobyl's legacy 30 years on by jcranmer on Tuesday April 26, 2016 @01:38PM (#11573932)
The summary on Wikipedia says: "The SCRAM was started when the EPS-5 button (also known as the AZ-5 button) of the reactor emergency protection system was pressed: this engaged the drive mechanism on all control rods to fully insert them, including the manual control rods that had been incautiously withdrawn earlier."

I don't know if that's true or not, but it seems like it ought to be true from a fail-safe perspective.