Also keep in mind that this single piston engine is two-stroke and not four as in the article.
Back to four stroke engines: Momentum and the firing of other pistons keeps the whole thing cycling back around. The more pistons you have, the more there are firing between each revolution of a given piston (and thus overcoming resistance and supplementing that momentum) and thus the more power available to drive the vehicle.
> Back to four stroke engines: Momentum and the firing of other pistons keeps the whole thing cycling back around
The firing of other pistons helps, but really, momentum alone is sufficient. There are tons of single-cylinder, 4 stroke motorcycle, scooter, and off-highway engines out there.
As for the answers parallel to mine that say it's the mass of the other pistons, the mass of a piston is trivial in comparison to that of the flywheel. Even lawn mowers mentioned in one example have flywheels (at least the ones I owned always did). The mass of a tiny lawn mower piston is going to have a hard time against the relatively large mass of a lawn mower blade with no flywheel.
To speak to your two points: 1. My motorcycle's pistons lie on their sides, gravity has no practical effect.
2. Power stroke movement is caused by the expansion of burning gases, period. All other factors, such as flywheel inertia, contribute relatively minimally.
Initially, a secondary motor causes the rotating components to rotate, which causes the pistons to move in the cylinder. Later, either inertia or the power stroke from another cylinder maintains the rotation.
The piston movement itself is caused by the piston arm, which is offset from the axis of the crank shaft.
1. The intake stroke piston movement may be considered to be caused by gravity and/or atmospheric pressure
2. The power stroke piston movement may be considered to be caused by gravity and/or atmospheric pressure and/or the expansion due to explosion all taken together
Correct me if I am wrong.
But what baffles me is this: what causes the piston movement during the compression stroke and exhaust stroke? Any expert here to enlighten me on this?
edit: typo