Re:Lufthansa jet and drone nearly collide near LAX
by tzs on Saturday March 19, 2016 @12:43AM
(#11317345)
30 seconds of Googling turns up numerous examples of bird strikes on the leading edge of wings, some with very substantial damage.
Why would airflow around the wing keep a drone from hitting it but not a bird?
Re:Lufthansa jet and drone nearly collide near LAX
by nether on Saturday March 19, 2016 @12:46AM
(#11317360)
Nothing. Upstream flow stagnates at the leading edge, excess bug splatter there attests to that.
Re:Lufthansa jet and drone nearly collide near LAX
by mveety on Saturday March 19, 2016 @01:25AM
(#11317458)
It can stagnate to the point of bugs not having much of an issue staying on the wing during flight. I remember a case when I was flight training where we had a little spider as a passenger on the top of the starboard wing for the duration of the flight. The little guy didn't fall off until the wing stalled out when we were landing.
Re:Lufthansa jet and drone nearly collide near LAX
by ajross on Saturday March 19, 2016 @02:10AM
(#11317546)
That's a different effect. The region just above the surface is a turbulent boundary layer without much net flow. But it's very thin.
Re:Lufthansa jet and drone nearly collide near LAX
by nether on Saturday March 19, 2016 @12:41AM
(#11317341)
There isn't really any "turbulence" behind any modern wing in typical flight regimes. They're very low drag, so flow off the trailing edge is as smooth as the upstream flow.
Re:Lufthansa jet and drone nearly collide near LAX
by nightski on Saturday March 19, 2016 @01:24AM
(#11317457)
This was near landing, so I assume flaps were deployed. That changes things a bit.
Re:Lufthansa jet and drone nearly collide near LAX
by throwaway_xx9 on Saturday March 19, 2016 @01:13AM
(#11317425)
Well, except for those pesky wingtip vortices that can down a smaller airliner.
Hitting the fuselage, or entering an engine is probably more realistic. Both would be expensive, but won't be a threat to the passengers. Maybe hitting the wingtips would be doable ... not sure.