In reference to the second graph on the page, mach 1 is apparently 1125.33 fps
Do we know if the space guns are rifled or smooth bore?
The problem with those graphs is that they are not optimizing propellant quantity for each barrel length. Adding an axis for quantity of propellant shows that you get diminishing returns to increasing barrel length and propellant, but there is a limit to how much you can increase both without increasing the barrel's thickness (as well as the firing mechanism's strength).
You also have to remember that a gun will require > Mach 25 to get to orbit, and air acts differently at that kind of speed (, and once past ~Mach 3).
Is there a reason the space gun would be at a 45 degree angle and not pointed vertically? I know the reason rocket launches happen as close to the equator as possible, but they still go straight upwards...
I should also mention that unless the projectile was fired at or above escape velocity (intended to leave the Earth's gravity well), it would require some onboard propulsion to 'circularize' its orbit (and avoid crashing back into the Earth on its first time around).
[1] https://en.wikipedia.org/wiki/Rocket-assisted_projectile
(As nickff points out, modern tank cannons are generally smoothbore; the current fashion for armor-piercing is solid kinetic darts that need to go very, very fast to punch through their target, and rely on stabilizing fins for accuracy.)
Probably second biggest down sides of rifling is that it weakens the barrel. How much depends a lot on how the rifling is done. But anyhow this has to be compensated with thicker/stronger barrel.
But that gets problematic at extreme pressures. You wan't to use pressure vessel steel, because such steels 1. have good fatigue strength and 2. they tend to send around little less shrapnel when they fail. Problem is that such steels are typically low alloy steels with somewhat low yield strengths. So you would like to make thicker barrel, but the problem here is that you quickly hit diminishing returns. There is usually very little point making barrel thicker if the outer diameter is twice the inner diameter. (Except if you need more rigidity to improve accuracy. But that's whole another subject.)
Anyhow, the brits still use rifled tank gun.
The gun can be built somewhere in the Andes, at 4 km altitude. It can be pretty long there. Plus using either ablative head - like new Russian-Indian air missiles - or small forward jets - similar to Russian 200miles/h torpedo - will help to decrease atmospheric speed losses.
The 6.5 Mach gets you to 180km altitude from powerful regular gun - https://en.wikipedia.org/wiki/Project_HARP :
"On November 18, 1966 the Yuma gun fired a 400 lb (180 kg) Martlet 2 projectile at 7,000 ft/s (2,100 m/s)[1] sending it briefly into space and setting an altitude record of 180 km (590,000 ft; 110 mi);"
That means that it was going at least 5 Mach after reaching 30km altitude. Doesn't looks like such a big loss of speed in the atmosphere - only about 1 Mach due to atmosphere as the other 0.5 Mach - due to gravitation.
Even though this wouldn't be appropriate for use for delicate satellites, I wonder if this would be a critical piece of equipment for industrialized space - raw materials like fuel and oxygen and structural materials. Unfortunately full satellites would be a challenge since googling reveals that experiments involving these things included 10,000 gees of acceleration.