News for hackers. Stuff that matters.
Re:Why are submarines demagnetized? by zymhan on Wednesday January 27, 2016 @08:06AM (#10979790)
4,000 Amps is a ridiculous amount of current. Though when you have a nuclear power plant nearby...

Also, this line made me shudder:

> "...stringing an electric cable the length of the ship and pulsing 2,000 amps through the cable."

EDIT: Okay maybe not that ridiculous, apparently the Luxor hotel has higher-amp lightbulbs http://www.wolframalpha.com/input/?i=4000+amps

Re:Why are submarines demagnetized? by brandmeyer on Wednesday January 27, 2016 @11:24AM (#10980890)
The degaussing facility uses shore power. They could mean 4000 ampere-turns, too.

Source: I went through one of these back in the day.

Re:Why are submarines demagnetized? by zymhan on Wednesday January 27, 2016 @12:14PM (#10981289)
Oh, it's a degausser? So it's not running regularly while at sea?
Re:Why are submarines demagnetized? by drostie on Wednesday January 27, 2016 @12:27PM (#10981384)
Correct. The magnetic signatures seen are the permanent magnetic moments embedded in the steel of the ships, which are picked up by passive magnetic-anomaly detectors. These have to be removed by randomization in a normal all-at-once degaussing process.

It is hypothetically possible to have an active-detection process too, but presumably that would take the form of emitting a pulse of electromagnetic radiation and looking for its echoes, in other words it's just another form of vision. The standard problem applies: find a frequency at which water is mostly transparent. Unfortunately the absorption spectrum for water is https://en.wikipedia.org/wiki/Electromagnetic_absorption_by_... , it has a minimum in the visible range.

In addition to being one of the more stunning confirmations of evolution (of course our eyes are only sensitive to the least-absorbed wavelengths of light in water -- our ancestors evolved eyes in the ocean! there weren't many other useful wavelengths down there!) this has the nasty property that it's unlikely that we'd be able to detect a sub this way with any better approach than shining a bright laser or spotlight or what have you, and watching what's reflected back with our own eyes.

Re:Why are submarines demagnetized? by Flammy on Wednesday January 27, 2016 @12:33PM (#10981430)
The ships undergoing this look kinda crazy. Couldn't find the exact image I was thinking of but here is a sub with wires wrapped around it:

http://systems.polyamp.com/images/stories/DepermingSub.jpg

Re:Why are submarines demagnetized? by PhasmaFelis on Wednesday January 27, 2016 @06:48PM (#10984563)
Huh. It's like naval rope bondage.

(Which is probably somebody's fetish)

Re:Why are submarines demagnetized? by CamperBob2 on Wednesday January 27, 2016 @04:13PM (#10983436)
I'm a bit unclear on how degaussing the hull prevents the sub from showing up as a magnetic anomaly. All that would do is keep the vessel from affecting nearby compasses. It still distorts the local geomagnetic field, doesn't it, just by virtue of being made from a ferromagnetic material...?
Re:Why are submarines demagnetized? by dnautics on Wednesday January 27, 2016 @06:36PM (#10984496)
"All that would do is keep the vessel from affecting nearby compasses."

"It still distorts the local geomagnetic field."

These two statements are trivially identical.

Re:Why are submarines demagnetized? by CamperBob2 on Wednesday January 27, 2016 @09:50PM (#10985797)
Qualitatively, but not quantitatively. A large metal object might not affect a conventional compass reading in a noticeable way, but if the enemy is flying around with cryocooled Josephson-junction magnetometers or whatever, they'll still see a distortion in the local field.

I'd think that the permeability of a submarine hull -- magnetized or not -- would be very different from that of the surrounding seawater.

Re:Why are submarines demagnetized? by dnautics on Thursday January 28, 2016 @04:21PM (#10991461)
Oh it doesn't completely erase the signal, but it minimizes it. P8 Orions have a plasma induction magnetometer in the back that is supposed to be able to see the degaussed submarines. The Russians did something even simpler: they took photographs from space and saw where submarine propellers were causing churn in the ocean cyanobacteria.
Re:Why are submarines demagnetized? by dnautics on Wednesday January 27, 2016 @06:32PM (#10984467)
I think your understanding of evolution is a bit off, since there are other creatures with common ancestor (birds) that can see into long UV.
Re:Why are submarines demagnetized? by madaxe_again on Wednesday January 27, 2016 @07:09PM (#10984694)
And magnetic anomalies, apparently, if they're migratory, via polarisation of uv iirc.
Re:Why are submarines demagnetized? by dnautics on Wednesday January 27, 2016 @07:43PM (#10984953)
another hypothesis is that spin-coupled electrons preferentially and directionally emit photons from a cryptochrome protein. But tbh, we don't really know yet.

http://www.ks.uiuc.edu/Research/cryptochrome/

Re:Why are submarines demagnetized? by zimmund on Wednesday January 27, 2016 @12:56PM (#10981610)
Thanks for your aclaration, it helped me understand the idea :)
Re:Why are submarines demagnetized? by cocoablazing on Wednesday January 27, 2016 @12:33PM (#10981432)
The degausser is a pier-like structure constructed at shore facilities for submarines.

Here is a degausser for the largest US submarines: https://www.google.com/maps/place/30°46'44.3%22N+81°29'30.6%...

Re:Why are submarines demagnetized? by zymhan on Wednesday January 27, 2016 @01:15PM (#10981759)
Awesome, thanks for link!
Re:Why are submarines demagnetized? by gist on Wednesday January 27, 2016 @02:19PM (#10982311)
"Oh, it's a degausser"

Ah makes me remember large CRT monitors that went "bonk" when you turned them on (to degauss). I actually still have a Sony 30" TV that does the same thing (and it's quite loud actually).

Re:Why are submarines demagnetized? by URSpider94 on Wednesday January 27, 2016 @04:48PM (#10983738)
Going back even older, the first TV's didn't have degaussing coils built in. If you moved the TV, a technician would have to come to your house with a portable coil and do it for you.
Re:Why are submarines demagnetized? by gist on Wednesday January 27, 2016 @06:56PM (#10984611)
Wow what was the reason that moving the TV meant you needed to degauss? Obv. has to do with magnetic field but I always thought it simply had to do with power being turned on (and only because that is when it seemed to degauss).
Re:Why are submarines demagnetized? by URSpider94 on Wednesday January 27, 2016 @07:58PM (#10985093)
Simply that moving the TV exposes it to a different localized magnetic field -- just like a compass inside a building. This could also be the result of moving around big loudspeakers near the TV (especially if they aren't magnetically shielded).

Built-in degaussing circuits fire when you turn on the TV presumably because (a) it disrupts the image, so best to do it at turn-on than randomly while you are watching, and (b) because you are unlikely to move the TV while it's on.

Re:Why are submarines demagnetized? by robotresearcher on Wednesday January 27, 2016 @12:38PM (#10981464)
It would have been really helpful if the article had made that clear.
Re:Why are submarines demagnetized? by brandmeyer on Wednesday January 27, 2016 @12:27PM (#10981381)
It isn't even part of the ship. Its a big coil that the ship pulls into.
Re:Why are submarines demagnetized? by esaym on Wednesday January 27, 2016 @09:21AM (#10980080)
Well as far as energy, depends on voltage. That's just 4000 watts if the voltage is just 1 volt.
Re:Why are submarines demagnetized? by astrosi on Wednesday January 27, 2016 @10:19AM (#10980427)
Whilst that is true, it really all depends on the resistance of the thing that you are passing the current through.

Remember that P = I^2 R (i.e. power goes as the square of the current for a constant resistance)

so for an object of constant resistance then to double the current than you need 4 times the power.

Re:Why are submarines demagnetized? by SigmundA on Wednesday January 27, 2016 @10:02AM (#10980298)
Yes always annoying when amperage is discussed without voltage, it's like when people focus on torque rather than horsepower and conflate torque with power.
Re:Why are submarines demagnetized? by deelowe on Wednesday January 27, 2016 @12:28PM (#10981385)
Not always. V=IR. More amperage means that resistance has a more significant affect. This is why transmission lines are ran at high voltages. You can get away with smaller wire sizes and significantly less thermal loss.

The first thing I think about when I see 4Ka is that any wires used would be enormous.

Re:Why are submarines demagnetized? by jschwartzi on Wednesday January 27, 2016 @06:13PM (#10984369)
V=IR only holds for direct current. The transmission lines can be run at high voltages and relatively small diameters because they carry alternating current, which is a much more efficient way of transmitting electrical energy over long distances. If they were DC then they would be sized more like sewer pipes.
Re:Why are submarines demagnetized? by upofadown on Wednesday January 27, 2016 @09:46PM (#10985779)
V=IR works perfectly well for AC just as long as you measure the AC in terms of RMS voltage and current. For sinusoidal AC the result is about 0.7 the peak value. There would be no significant difference in wire size.

DC is in fact the better way to transmit energy over long distances. The computer I am typing this on is powered by energy transmitted 900 km in the form of DC.

Re:Why are submarines demagnetized? by mw67 on Wednesday January 27, 2016 @09:47AM (#10980221)
But as far as dangerousness, only 0.1A can kill a human, whereas voltage is not so important.
Re:Why are submarines demagnetized? by oxplot on Wednesday January 27, 2016 @09:54AM (#10980256)
Voltage is what drives current so they're directly proportional and their proportion depends on electrical resistance. Given that human body's resistance to electricity is more or less constant, that allows calculating a dangerous voltage just as easily.
Re:Why are submarines demagnetized? by yodon on Wednesday January 27, 2016 @11:58AM (#10981143)
The body's resistance is generally not what matters, it's generally the resistance of the connection between the body and the power source. If the connection is made via an air-gap spark you can need thousands of volts to ionize the air to allow the spark to form which allows the current to enter the body (corresponding to tens of thousands of ohms at a killing current, although that resistance is highly non-linear and drops suddenly after the initial spark connection ionizes the air). If the connection is made via EEG or EKG leads attached with conductive paste, the connection resistance can be a fraction of an ohm and the killing voltage can be well under 100 volts. The highly variable nature of the connection resistance is just one reason why the killing threshold is generally described in terms of amps rather than volts. If you're worried about whether a circuit could kill a patient and you must think in terms of voltage, you're not worried about whether you know the body's resistance, you're worried about whether you know the connection resistance.

In practice pretty much everyone who designs safety critical systems where electrocution is a concern focuses on current because it's a much better way to model and analyze the system risks than voltage.

Re:Why are submarines demagnetized? by danmaz74 on Wednesday January 27, 2016 @11:56AM (#10981122)
Except, you also need to keep in mind the internal resistance of your power source. If that one is higher enough than the human body resistance, you could have a very high voltage which is actually not very dangerous.
Re:Why are submarines demagnetized? by stordoff on Wednesday January 27, 2016 @04:38PM (#10983654)
I assume this is the reason I was able to safely use a 5000V power source in school, despite being shocked multiple times (IIRC, the maximum current it would give, even if you shorted the output terminals, was 3mA. Our teacher at the time did initially insist on wearing latex gloves, but they were discarded once we realised the current would just arc through the gloves and leave holes in them).

You do start to see some odd effects at those voltages though - I recall holding one of the output plates for ten minutes or so, without realising the supply was on. Didn't really think much of it, until I realised I could hold my hand over a piece of tin foil (roughly 1cmx1cm) and it would be attracted to my hand from 2-3cm away (that persisted for five minutes or so).

Re:Why are submarines demagnetized? by chopin on Wednesday January 27, 2016 @09:52AM (#10980246)
Through your body, yes. With 1V you can't drive much of a current through ones body.
Re:Why are submarines demagnetized? by thescriptkiddie on Wednesday January 27, 2016 @10:04AM (#10980309)
Even 48 volts won't drive any appreciable current through dry skin, but you can string four car batteries together and weld with them. It's frightening that people are so ignorant about electricity.
Re:Why are submarines demagnetized? by TheCraiggers on Wednesday January 27, 2016 @10:32AM (#10980522)
Eh, as far as the list of frightening things that people don't know about goes, electricity is pretty far down the list for me. Most people just don't come into contact with it often enough, so simply saying things like "don't get near a downed powerline" is probably good enough.

Stuff like radon or CO are way higher on that list, in my personal opinion. Hell, even people's general ignorance of their countries' political process and what their (elected or not) officials are doing is way more frightening to me than their ignorance about electricity.

Sorry to be so damn pedantic.

Re:Why are submarines demagnetized? by ethbro on Wednesday January 27, 2016 @11:49AM (#10981078)
I think it's fair to say "invisible" things are generally all pretty high on the list of frightening things people don't know about.

Including but not limited to: software, nuclear radiation, CO and chemistry in general, electricity, microbiology, politics in practice, macro-economics and banking, ... (it's a pretty long list)

Re:Why are submarines demagnetized? by aw3c2 on Wednesday January 27, 2016 @12:03PM (#10981185)
Thoughts. Thoughts are the worst.
Re:Why are submarines demagnetized? by thescriptkiddie on Wednesday January 27, 2016 @02:01PM (#10982175)
You're right, ignorance of those things is more dangerous. But people do interact with electricity every day, so I would have thought they'd know the basics a little better.
Re:Why are submarines demagnetized? by AnimalMuppet on Wednesday January 27, 2016 @12:10PM (#10981254)
Not through dry skin, no. But if the thought of it makes you sweat...
Re:Why are submarines demagnetized? by zymhan on Wednesday January 27, 2016 @10:06AM (#10980330)
Yes but it's a reasonable assumption that if they're pushing 4000 amps through the cables to generate a magentic field big enough to disguise a submarine, then the voltage is not in the single or double digits.
Re:Why are submarines demagnetized? by mikepurvis on Wednesday January 27, 2016 @10:41AM (#10980590)
I assume that part of the reason for the "thick copper cables" is to bring the resistance as low as possible, like, under an ohm for a few thousand feet of 2 gauge wire.

Which will still be thousands of volts, but it sounds like it's pulsed thing as well, and they would certainly disable it if they're not in a dive or otherwise trying to be stealthy.

Re:Why are submarines demagnetized? by centizen on Wednesday January 27, 2016 @08:35AM (#10979912)
It might still be a little ridiculous - that light is one of the most powerful in the entire world
Re:Why are submarines demagnetized? by kaybe on Wednesday January 27, 2016 @11:58AM (#10981144)
I'm rather thinking about solar light testing facilities for space crafts here, such as ESA's Large Space Simulator.

The specs say: 'Intensity level with 19 lamps at 20 kW: 2000 W/m' (6m solar beam diameter) [2]

(Also, 'On request, the sun simulator can be equipped with 32 kW lamps'.)

[1] http://www.esa.int/Our_Activities/Space_Engineering_Technolo...

[2] http://emits.sso.esa.int/emits-doc/ESTEC/AD1-AO-5580.pdf

Re:Why are submarines demagnetized? by vacri on Wednesday January 27, 2016 @08:19AM (#10979857)
One of the lab techs where I went to university had a poster up in the workshop with a series of nails and the current required to melt them. At the end of the series was a thick bolt, marked "1100 Amp Slow-Blow Fuse"...
Re:Why are submarines demagnetized? by seanp2k2 on Wednesday January 27, 2016 @01:41PM (#10981985)
Some competition car audio set-ups are using tens of thousands of watts, usually at 14.4 or 18 volts, so the amperage can get into the thousands. The wiring used for that is usually multiple runs of 0-gauge or better. 4/0 is a bit less than half an inch and is rated for 300-400 amps.
Re:Why are submarines demagnetized? by bayouborne on Wednesday January 27, 2016 @10:25AM (#10980473)
I'm unclear on that point, is that current applied after construction, or is it an operational mechanism? If the latter, it seems like that would be a beacon of sorts as well (for some other type of detector)
Re:Why are submarines demagnetized? by dnautics on Wednesday January 27, 2016 @06:28PM (#10984441)
the luxor hotel also isn't submerged in a giant body of electrically conductive liquid!!