Cortex can't beat that, you can tight loop an AVR to cycle precision and get pretty cool return for your running frequency; the Cortex are nowhere as linear. [0]
Altho, I agree that the bigger parts are useless... xmegas and such have absolutely no reason to exist IMO.
On the other hand the CM3 and especially M4's are awesome beast; and the parts like the STM32's are just peerless in terms of features -- they are just borderline scary.
On the other hand, I was worried a little while back that there was nothing between these trusted 8 bits cores and the ARMs -- but nowadays there is; Espressif esp8266 is pretty cool, but the next one in the pipeline is awesome [1]; 2 (well 3 but) cores, and more peripherals than you can shake a stick at. Thats the first SoC that for me can give the STM32 (and NXP equivalent) a good run for their money (and win, in my opinion).
Dislaimer: [0] I know the AVR very well, I'm the author of simavr: http://github.com/buserror/simavr -- [1] I'm also one of the beta tester for the ESP31/32 new chipset.
And finally, the idea of tight loops engineered to cycle precision is dying a slow death in general. You just smother the hard timing requirements with excess frequency and performance.
Curious thing about the ESP8266: it doesn't use ARM or any of the other popular kids on the block but a Tensilica Xtensa architecture.
I can buy some 10F series PICs cheaper than a 555 timer chip, which is pretty amazing.
I don't really believe either of those claims. At 1ku quantity on Digikey (which admittedly is not the cheapest vendor) cheapest Cortex-M0 chips cost $0.378 and low-power chips (NXP KL03) start from $0.504. That aforementioned KL03 is advertised to run at 50 µA/MHz.
Meanwhile cheapest PIC costs $0.35 and is rated 175µA at 4 MHz, which equals to 43.75 µA/MHz. Of course the power consumption figures are not directly comparable, and something like µA/MIPS might be better metric anyways. But based on this there is no way PIC is anywhere near fifty times more power efficient or ten times cheaper.
For a PIC10KF320/322 you're looking at:
Sleep: 20nA, 1.8V Operating: 25uA @ 1Mhz, 1.8V Watchdog Timer: 500nA, 1.8V
Of course that's dependent on what' you're doing with the io pins etc.
See:http://ww1.microchip.com/downloads/en/DeviceDoc/40001585D.pd...
edit: fix typo
You know Atmel makes Cortex M chips too right? They're very good in my experience - e.g. they have some of the very few Cortex chips that support USB High Speed (480 Mb/s).
I have no complaints with them.
Atmel AVR will redesign things out from under you. We could not get a new JTAG interface to work with an old chip.
Meanwhile, I've never been friends with the microchip Dev tools. Clunky, expensive, proprietary. Here's hoping we'll get AVR ergonomics and PIC economics...
But it might be too late to matter. Cortex-M0 eats the low end, M4 the mid end, and the phone SoCs the high end. (Even Intel may be threatened at some point... Different business though)