News for hackers. Stuff that matters.
Re:The NICAM Codec replacement project by Piskvorrr on Wednesday January 20, 2016 @09:24AM (#10938227)
Something akin to this? http://gpsworld.com/wirelessinfrastructuregoing-against-time...

I believe that operating a rogue transmitter in a licensed band would get you located rather quickly - even though the tech itself may not necessarily be secure, there are other enforcement mechanisms.

Re:The NICAM Codec replacement project by leoedin on Wednesday January 20, 2016 @09:40AM (#10938346)
It depends how strong it is.

The obvious benefit for a malicious person would be to set their meter to the cheaper tariff by replaying the signal.

It wouldn't need to be a powerful signal - if you were broadcasting right next to the meter even a few milliwatts would be enough. Build a faraday cage around the meter to be sure! Just remember to dismantle it before the meter reader comes round.

Re:The NICAM Codec replacement project by Piskvorrr on Wednesday January 20, 2016 @12:37PM (#10939805)
That would also disable the legit switching, no?
Re:The NICAM Codec replacement project by pbhjpbhj on Wednesday January 20, 2016 @09:37AM (#10938324)
Surely you only need the rogue transmitter to be stronger at the receiver (your electric meter?) than the signal from the transmitter. That doesn't seem like a strong enough signal to easily locate you?

Seems a complicated way to do something - doesn't Economy7 operate between fixed times overnight?

I wonder if they can cut power using the transmissions - seems like something that could be used for emergency control of demand in times when the National Grid has problems.

Re:The NICAM Codec replacement project by Piskvorrr on Wednesday January 20, 2016 @09:46AM (#10938393)
Hm, that's probably the point: there is no threat (to the utility provider) in that model. Worst thing you could do is make someone's appliances run with a more expensive rate; hardly a likely event or one worth preventing.

(As for power cutting, that seems unlikely - the system is in place to provide larger power consumption when base production exceeds the load. Around here, the basic low/high rate info is provided by https://en.wikipedia.org/wiki/Load_management#Ripple_control , which needs a not-really-smart power meter, but runs on top of the power line, obviating the need for a side channel)

Re:The NICAM Codec replacement project by jon-wood on Wednesday January 20, 2016 @10:09AM (#10938537)
The smart metres that are being rolled out at the moment have a remote kill switch, although it couldn't really be used to implement rolling blackouts as you have to physically hit a button to reactivate it.
Re:The NICAM Codec replacement project by Piskvorrr on Wednesday January 20, 2016 @12:36PM (#10939795)
That's a DoS waiting to happen, IMNSHO. If it's easy to transmit on the frequency locally at low power and there's no auth, a drive around the neighborhood could create a blackout at anyone's demand.
Re:The NICAM Codec replacement project by flapjackdan on Wednesday January 20, 2016 @02:23PM (#10940608)
At least in the UK, smart meters don't use radio-based time switching as they have their own clocks which are synchronized with their remote system. All commands to these smart meters (including the ability to remotely disconnect them) are cryptographically protected to ensure integrity and authenticity, and also have anti-replay protections.

Disclaimer: I've worked for a smart metering manufacturer.

Re:The NICAM Codec replacement project by Piskvorrr on Thursday January 21, 2016 @06:01AM (#10944492)
Well, that's excellent news then. Thank you for the clarification.