News for hackers. Stuff that matters.
Re:802.11ah Wi-Fi Standard Approved by cjensen on Friday January 08, 2016 @07:58PM (#10869500)
Summary:

802.11ah: Better range, lower bandwidth

802.11ad: Better bandwidth. Doesn't go through walls.

802.11ax: Successor to 11ac expected in 2019

Re:802.11ah Wi-Fi Standard Approved by ksec on Friday January 08, 2016 @10:56PM (#10870030)
There is 802.11ay expected in 2019 as well, a step up from 802.11ad using the same 60Ghz. Up to 20Gbps, 3x the rate of 802.11ad.

I really really want 802.11 ay and ax to come faster, it will truely bring us to the world of Wireless with the speed we expect from 1Gbps. Wireless Display to TV no longer be slow of choppy with quality degradation.

Re:802.11ah Wi-Fi Standard Approved by melted on Saturday January 09, 2016 @12:12AM (#10870169)
60GHz basically means "same room only". Won't go through walls for sure. Should be useful for open space offices though.
Re:802.11ah Wi-Fi Standard Approved by amenghra on Saturday January 09, 2016 @01:27AM (#10870330)
This can be an advantage depending on the use-case. E.g. an access point in each home or room means the signals aren't interfering with each other.
Re:802.11ah Wi-Fi Standard Approved by melted on Saturday January 09, 2016 @03:08AM (#10870507)
Someone is going to make a killing on tiny, inexpensive RJ45 60GHz access points and switches that support PoE. Killer use case: stick it into a wall, and everything in the room gets gigabit speeds. No wall warts to deal with.
Re:802.11ah Wi-Fi Standard Approved by will_hughes on Saturday January 09, 2016 @05:35AM (#10870784)
Ubiquiti already have something like this, although only 2.4Ghz b/g/n - https://www.ubnt.com/unifi/unifi-ap-wall/

About AUD$100/unit.

Re:802.11ah Wi-Fi Standard Approved by ajayh on Saturday January 09, 2016 @10:25AM (#10871516)
Ruckus Wireless has a 2.4Ghz and 5Ghz a/b/g/n/ac - http://www.ruckuswireless.com/products/access-points/zonefle...

Going to be much more expensive than the Ubnt unit.

Re:802.11ah Wi-Fi Standard Approved by donatj on Friday January 08, 2016 @11:03PM (#10870045)
5ghz AC doesn't go through my plaster walls now. I've got two walls between me and my Airport Extreme and about 10 physical feet and have half signal showing on my phone.
Re:802.11ah Wi-Fi Standard Approved by zombees on Saturday January 09, 2016 @01:48AM (#10870378)
In this case, what they mean is that the signal will be truly line of light. As you go up in frequency, radio starts to behave more like light so while you may get some convenient reflections here and there, for the vast majority of the time, if the antenna doesn't have a clear path to the transceiver, you won't know there even is an access point.
Re:802.11ah Wi-Fi Standard Approved by digi_owl on Saturday January 09, 2016 @03:30AM (#10870542)
I suspect this can be quite convenient for various places where you want to limit access to individual rooms etc, but don't want to deal with the tangle of cables and ports that a wired network would require.
Re:802.11ah Wi-Fi Standard Approved by dogma1138 on Saturday January 09, 2016 @09:24AM (#10871322)
If you want a good 5ghz AC setup buy a couple of good repeaters with seamless handoff and put one in each room that's what 5ghz was mainly designed for.

Airport is a very crappy 5ghz ap to begin with so is the Google elcheapo-de-slink.

Re:802.11ah Wi-Fi Standard Approved by jrockway on Saturday January 09, 2016 @11:41AM (#10871831)
Not really.

As I always request in these threads, I'd like someone to point me to a peer-reviewed paper that shows 5GHz being attenuated more by building materials than 2.4GHz.

The usual culprit is that people put their 5GHz networks on the old "low power channels", which nearly every router I've ever seen chooses by default. Half the power, half the signal in the next room, of course.

Choose channel 149 which is full-power.