News for hackers. Stuff that matters.
Re:How the McLaren F1 Got Its Sound by Animats on Thursday January 07, 2016 @03:34PM (#10860548)
If you're going to fake it, just buy a SoundRacer accessory.[1]

Lotus put in a sound generator as original equipment on their electric prototype supercar.[2] Not only did it make fake "vroom" sounds, the driver had to shift, with a momentary loss of power during shifting. There's no shiftable transmission on that car; it was all faked in software. Everyone laughed at Lotus, and that idea went away, not to be heard again.

The age of "vroom" is over, now that no production gas car other than a few limited production supercars can out-accelerate Tesla's family sedan.

Now this is a startup sound.[3] M1A2 Abrams tank, turbine engine.

[1] http://www.soundracer.se/?p=98 [2] http://www.greencarreports.com/news/1081736_fake-shifting-fo... [3] https://www.youtube.com/watch?v=sXE4tMEYCoI

Re:How the McLaren F1 Got Its Sound by int_handler on Thursday January 07, 2016 @04:33PM (#10860958)
Faking the transmission is really a bizarre move, but actually having a multiple-gear transmission in an electric racecar is actually not a bad idea. Formula-E cars have 5-speed sequential transmissions in order to maximize torque [1], and this may be coming to electric road cars as well [2].

[1]: https://www.reddit.com/r/FormulaE/comments/2gbika/why_do_for...

[2]: http://www.motor1.com/news/48231/bosch-says-evs-will-soon-ge...

Re:How the McLaren F1 Got Its Sound by Animats on Thursday January 07, 2016 @05:07PM (#10861180)
Bosch makes transmissions. They're getting worried.

Formula-E cars are required to use a specific McLauren motor.[1] The need for a gearbox may reflect its limitations. Formula-E rules also limit input current, so using huge amounts of electrical power for a few seconds of acceleration isn't permitted. In other words, they don't allow Tesla's "launch mode".

Early Tesla models had a two-speed gearbox. That was a disaster. The shock of changing gears over such a wide range wore out the gearboxes rapidly.

Electric locomotives have been transmissionless since the first GE locos. "You cannot strip the gears of a magnetic field", one of the early GE designers wrote. Some things just work better electrically. For a sense of this, here's part of the restoration of the biggest steam locomotive ever built, the Big Boy.[1] It sat at the Ponoma fairgrounds for half a century, and was then towed out and sent to the Union Pacific shops for a full restoration. It's being towed out by a standard sized modern AC Diesel-electric locomotive, which has more drawbar pull than the Big Boy. What's impressive is the precise control. The initial move is about one foot per minute, because they're pulling the old steam giant through a tight curve of temporary track. The Diesel-electric doing the pull has synchronous AC motors and solid state controls, and can apply huge torques smoothly at low speeds with no wheel slip. All the wheels are locked together by active control. You don't need a transmission to get low-end torque from an electric.

[1] http://www.mclaren.com/appliedtechnologies/products/item/e-m... [2] https://www.youtube.com/watch?v=-Ji2aGJJAx8

Re:How the McLaren F1 Got Its Sound by jacquesm on Thursday January 07, 2016 @06:07PM (#10861522)
The radius of that track is insane.
Re:How the McLaren F1 Got Its Sound by Animats on Thursday January 07, 2016 @07:08PM (#10861880)
It's kind of distorted by a telephoto lens, but yes. That was temporary track to get the loco from the parking lot of the Pomona Fairgrounds onto Metrolink commuter tracks. They'd done enough work on the Big Boy that it would roll on its own wheels at slow speed. UP actually cut the Metrolink rails, spliced that temporary spur in, got the Big Boy out, put in a retired Diesel for display, and restored the Metrolink tracks. On Metrolink track, they hauled the Big Boy to a connection with UP rails, then hauled it to UP's Coulton yard. There it got enough repairs for a long tow at a reasonable speed, with the lubrication systems working. It's now at Cheyenne, Wyoming, where it will be fully restored and converted to burning oil, then used for fan trips and PR.

(Why did steam die out? Maintenance interval for the Big Boy - daily. Maintenance interval for the Diesel-electric towing it - 6 months.)

Re:How the McLaren F1 Got Its Sound by jacquesm on Thursday January 07, 2016 @07:14PM (#10861912)
I watched the whole thing, thanks for the link.

Recently I took a little trip with this little guy:

http://www.hoornmuseumstad.nl/nw-24745-7-3474828/nieuws/vier...

Hard to imagine what it would be like to see that brute up close under power.

Re:How the McLaren F1 Got Its Sound by chiph on Thursday January 07, 2016 @04:09PM (#10860776)
BMW, VW etc. adding sound generators to their cars strikes me as basically cheating. This isn't the sound pipes, which divert engine noise into the cabin bypassing the firewall sound-dampening, but the artificial sounds injected into the car stereo speakers that try and make your turbocharged V-8 sound like a V-10.

http://www.popularmechanics.com/cars/a7923/the-rise-of-the-f...

Re:How the McLaren F1 Got Its Sound by Alupis on Thursday January 07, 2016 @04:11PM (#10860796)
In fairness, sometimes the fake noises are used because car cabins are much quieter today (and block a lot of natural engine noise). People who buy a sports car still expect the sports car sounds, but don't want to hear the road and other ambient noises.

Personally, I'd rather hear all the road noise and natural engine noise. You feel a lot more "connected" to the car and road that way...

Re:How the McLaren F1 Got Its Sound by Alupis on Thursday January 07, 2016 @04:10PM (#10860782)
> Everyone laughed at Lotus, and that idea went away, not to be heard again.

Well, it didn't totally go away (sadly). Ford fakes the engine sounds for 2015 Mustangs [1].

[1] http://jalopnik.com/the-2015-ford-mustang-ecoboost-fakes-its...