Monoprice now has $400 3D printers

Re:Monoprice now has $400 3D printers by LesZedCB on Monday November 23, 2015 @10:42AM (#10615159)

PLA is actually a bioplastic made from veggies and is actually considered food safe[1]. In fact, many of the plastic cups that you use are made from PLA, particularly anything clear. They can biodegrade given enough heat. The non-foodsafe part of 3d printing PLA is the hot end which is not clean, and can also be cross contaminated from printing other plastics such as ABS which is oil based.

[1] http://reprage.com/post/36869678168/is-3d-printed-pla-food-s...

[ Parent | on HN ]

Re:Monoprice now has $400 3D printers by kefka on Monday November 23, 2015 @04:35PM (#10617477)

You also have to deal with the FDM void issue. Look closely between the layers: they cannot be there if you are to consider your product to be food-grade. Fortuately there are ways to remediate this.

ABS is weak to acetone, so you can make an acetone vapor bath. Look this up how to do it.

PLA is the nasty one, as the solvent that dissolves it is methyl-ethyl ketone (MEK). Nastiest stuff I've worked with outside a fume hood. Use a respirator, gloves, and trash clothing. The stuff dissolves all sorts of polymers. It's also used as a polymer glue. But tl;dr: Don't use if if you don't have to.

[ Parent | on HN ]