However, even when the position of the train is known precisely (no need for fancy CTBC, just start counting wheel revolutions from a known starting point and reset any measuring error at the next known-good point, usually a station - which is the basic way the Parisians do it with their driverless metro lines), not every transport agency exposes this sort of raw data to the general public; usually it's watered down to "it's between Station A and Station B, with X seconds of delay."
FWIW, automation is actually mostly tangential to absolute v. moving block signalling. As far as I'm aware, most automated systems still use absolute block signalling.
On other lines, my understanding is that the signalling system doesn't know which train occupies a block, just that a train occupies the block. Which block is occupied isn't sent to a central control center either.
So "there's a Brooklyn-bound train 2 stops away" is the best it can do, since it can know based on which side of the tracks the train is on where the train is going. It can't know the letter or number.
The L train in New York is an example of where this is installed. My understanding is this means the two staff on the train are redundant; the driver pretty much just provides acknowledgement to the train to keep doing its thing, and the conductor only opens and closes doors and makes announcements (if that). They would run with only a single staff member except for union rules.