If Steve could continue to be a Cool Guy (sorry!) and confirm that would be wonderful because I've just been to Amazon to try and create a similar set-up.
Another implementation question: does the pump need a pipe connected to it, or is it sufficient as-is?
For those in the UK, here's what I ordered: Pump - http://www.amazon.co.uk/gp/product/B00BVK966C Thermostat - http://www.amazon.co.uk/gp/product/B00BVYCZ84 Hot plate - http://www.amazon.co.uk/gp/product/B00A4DE35G
Yes, it is all frighteningly cheap and I'm not going to leave it running unattended!
The pump is used as is, fully submersed in the water with no tubes. All it does is agitate the water to make the heating more evenly dispersed.
Your setup looks good, I was going to buy a similar control unit to yours until I found the Willhi version that just used regular outlets. The thing with this box is you have to do a little bit of wiring work to set it up. Turned out to be cheaper for me to buy the already assembled outlet version than the components for it.
I think you can already find tutorials online about people connecting this non-outlet style of thermocouple to a slow cooker to make a sous vide. That was my original plan until I sleuthed out this cheaper design. So check those tutorials out.
The best thing about sous vide is that you can "set it and forget it", you should thoroughly leave it unattended because it's so amazingly convenient.
The water pump has been fine so far after maybe 10 hours of being immersed over a few weeks, I figure if it gives up I'll get another one.
I put a pot on top of a hot plate. The hot plate is turned on but the Willhi unit turns the power on and off. At first it overheats the water by about 10 degrees, so give it time to heat up before immersing the food, but after cooling down it oscillates around 1 degree Fahrenheit.
Before the hot plate, I had that coffee element which I taped to the side of the pot. The problem with that previous heater was that despite saying "immersion", you can't submerse the cable without electrifying the water. The thing got banned in Canada. Don't buy one.
some questions:
first two links:
and were the same: http://www.amazon.com/gp/product/B00V4TJR00 ; was this intentional?second, does that little water pump handle the heat?
lastly, did you just bend up the heating element and place it directly in the water?