If you have the tinkering aptitude DYI is definitely way to go. These sous vide machines are really basic components. But most people want something that works outta the box and looks pretty. Ha ha, business!
But it definitely works. I've even reheated precooked frozen food while camping buy heating water to some temperature, pouring it into a cooler to prevent too much temperature drop, and putting in the precooked, still vacuum sealed bags into the cooler, and letting it sit there for an hour or two.
The temperature change was maybe five degrees over those two hours, but it was for reheating, and would have been fine for some foods as well. Kenji also has an article about sous vide in your kitchen sink, where you don't have to buy anything at all, though it only really works for shorter cooks and you won't have precise temperature control.
http://www.seriouseats.com/2013/06/video-how-to-cook-your-st...
some questions:
first two links:
And the star of the show, a temperature modulator with a standard plug: http://..
and but decided it was too dangerous to be worth it: http://..
were the same: http://www.amazon.com/gp/product/B00V4TJR00 ; was this intentional?second, does that little water pump handle the heat?
lastly, did you just bend up the heating element and place it directly in the water?
If Steve could continue to be a Cool Guy (sorry!) and confirm that would be wonderful because I've just been to Amazon to try and create a similar set-up.
Another implementation question: does the pump need a pipe connected to it, or is it sufficient as-is?
For those in the UK, here's what I ordered: Pump - http://www.amazon.co.uk/gp/product/B00BVK966C Thermostat - http://www.amazon.co.uk/gp/product/B00BVYCZ84 Hot plate - http://www.amazon.co.uk/gp/product/B00A4DE35G
Yes, it is all frighteningly cheap and I'm not going to leave it running unattended!
The pump is used as is, fully submersed in the water with no tubes. All it does is agitate the water to make the heating more evenly dispersed.
Your setup looks good, I was going to buy a similar control unit to yours until I found the Willhi version that just used regular outlets. The thing with this box is you have to do a little bit of wiring work to set it up. Turned out to be cheaper for me to buy the already assembled outlet version than the components for it.
I think you can already find tutorials online about people connecting this non-outlet style of thermocouple to a slow cooker to make a sous vide. That was my original plan until I sleuthed out this cheaper design. So check those tutorials out.
The best thing about sous vide is that you can "set it and forget it", you should thoroughly leave it unattended because it's so amazingly convenient.
The water pump has been fine so far after maybe 10 hours of being immersed over a few weeks, I figure if it gives up I'll get another one.
I put a pot on top of a hot plate. The hot plate is turned on but the Willhi unit turns the power on and off. At first it overheats the water by about 10 degrees, so give it time to heat up before immersing the food, but after cooling down it oscillates around 1 degree Fahrenheit.
Before the hot plate, I had that coffee element which I taped to the side of the pot. The problem with that previous heater was that despite saying "immersion", you can't submerse the cable without electrifying the water. The thing got banned in Canada. Don't buy one.
Because I couldn't believe it, I built my own for $45 using weird things from amazon. It didn't even take any electrical work or programming and can be setup in about a minute:
Cheap fish tank pump: http://www.amazon.com/gp/product/B00EWENKXO
Cheap hot plate: http://www.amazon.com/gp/product/B005T0SN0K
And the star of the show, a temperature modulator with a standard plug: http://www.amazon.com/gp/product/B00V4TJR00
Put a pot of water on the hot plate, insert fish tank pump, plug hot plate into the Willhi. Put your meat into a regular ziplock bag, leaving it open, dip it into the water. The pressure of the water will cause the air to leave the bag, creating a vacuum (you can find many demonstrations of this technique on youtube). Clip the bag to the side of the pot using some clothes pins. Bam! DYI sous vide.
Generally it maintains the temperature within +/- 1 degree Fahrenheit, which is good enough for a rare steak. I had this incredibly dangerous coffee heating element at first, which could keep the temperature within 0.1 degree, but decided it was too dangerous to be worth it: http://www.amazon.com/gp/product/B00V4TJR00
I then use a $25 Iwatani torch to char the surface: http://www.amazon.com/gp/product/B00BBJC1CY
As opposed to most butane cooking torches, this one seems to produce a large hot flame about 20 centimeters long and the diameter of a quarter.
Not to take away from this griddle or anything, but I'm pretty psyched about my sous vide machine and it was too easy to make just to not tell everyone that will listen.