News for hackers. Stuff that matters.
Re:Google OnHub Review by mrbill on Monday August 31, 2015 @07:54PM (#10149840)
What kind of uplink/downlink bandwidth do you have/need?

As the other poster said, the ERX doesn't have hardware offloading (UBNT beta forums says they're working on it), but for my use case, there's no difference in performance between the two so the cheaper ($50 vs $99) ERX is fine.

ERL has the advantage of the onboard flash being a USB flash drive plugged internally and a dedicated serial console port; ERX is permanent onboard flash and no serial console unless you open it up and find the points on the board.

Re:Google OnHub Review by simoncion on Monday August 31, 2015 @08:19PM (#10149944)
I'm going to dodge your question [0] and ask a different one that cuts to the heart of the matter [1]: "Unless I'm mis-reading the datasheet, it seems like the device has a worst-case switching speed of ~8.3 mbit/second. Have you played around with it to try to determine its performance when filtering or routing packets? (As opposed to just switching packets.)."

[0] Thanks much for the other info, though! That's useful stuff.

[1] Sorry for not asking this question in my original post. :(

Re:Google OnHub Review by mrbill on Tuesday September 01, 2015 @06:54PM (#10156367)
I can easily max out doing a speedtest on my 50/10 link from a client behind the ERX to a speed test server on the WAN side, if that helps any.
Re:Google OnHub Review by simoncion on Tuesday September 01, 2015 @08:34PM (#10156753)
Yeah, that helps! Thanks for the info.