News for hackers. Stuff that matters.
Re:Google OnHub Review by simoncion on Monday August 31, 2015 @04:34PM (#10148939)
Vaguely off-topic: Why'd you move from the ERL to the ERX? If my ERL burst into flames today, would you suggest that I replace it with an X? Assume that I have $120 dollars to spend and I don't need (but wouldn't particularly mind) extra switch ports. Is there anything that the ERL does better than the X?
Re:Google OnHub Review by mrbill on Monday August 31, 2015 @07:54PM (#10149840)
What kind of uplink/downlink bandwidth do you have/need?

As the other poster said, the ERX doesn't have hardware offloading (UBNT beta forums says they're working on it), but for my use case, there's no difference in performance between the two so the cheaper ($50 vs $99) ERX is fine.

ERL has the advantage of the onboard flash being a USB flash drive plugged internally and a dedicated serial console port; ERX is permanent onboard flash and no serial console unless you open it up and find the points on the board.

Re:Google OnHub Review by simoncion on Monday August 31, 2015 @08:19PM (#10149944)
I'm going to dodge your question [0] and ask a different one that cuts to the heart of the matter [1]: "Unless I'm mis-reading the datasheet, it seems like the device has a worst-case switching speed of ~8.3 mbit/second. Have you played around with it to try to determine its performance when filtering or routing packets? (As opposed to just switching packets.)."

[0] Thanks much for the other info, though! That's useful stuff.

[1] Sorry for not asking this question in my original post. :(

Re:Google OnHub Review by mrbill on Tuesday September 01, 2015 @06:54PM (#10156367)
I can easily max out doing a speedtest on my 50/10 link from a client behind the ERX to a speed test server on the WAN side, if that helps any.
Re:Google OnHub Review by simoncion on Tuesday September 01, 2015 @08:34PM (#10156753)
Yeah, that helps! Thanks for the info.
Re:Google OnHub Review by kornholi on Monday August 31, 2015 @06:16PM (#10149437)
It looks like X doesn't have any hardware acceleration for forwarding. With 64b packets, X can only push 130k PPS while ERL should do at least 1M PPS. This doesn't matter in a home network though.
Re:Google OnHub Review by simoncion on Monday August 31, 2015 @07:20PM (#10149722)
kornholi, do you have an ER X? If you do, I appreciate your first-hand information. If you don't, I asked mrbill the question that I asked because I was looking for his first-hand experience.

Regardless: Much love, man! :)