News for hackers. Stuff that matters.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by forgottenpass on Friday August 21, 2015 @12:16PM (#10098469)
When a device passes the beacons, its non-personal unique ID—called a MAC address—is recorded, encrypted and time-stamped.

Blip, you make me laugh. You know this will raise privacy concerns and say the sweet nothings that placate the general public, but inspire no confidence in people who know what those words mean.

I'm not here to say that as a JFK traveler I'm unhappy with the privacy considerations. I just want to point out you're pretending your design is good on privacy when simple tweaks would show the security minded you gave half a shit. I don't mind this monitoring if it is limited to the uses described, your maneuvering simply makes me giggle.

A MAC may not be in whatever bucket you're calling "personal" but is certainly more personal than "non-personal" implies. Encryption is effectively a "we're doing it right" buzzword to the general public. What are your authorized uses for the data? What's your KMI? What data minimization techniques are employed? Do you purge old records? Replace the MAC with an identifier that can't be tied back to MAC once the target has left the line? Hash MACs on entry in a way that is both time-costly to bruteforce and results in a different hash every day?

Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by heatish on Friday August 21, 2015 @12:59PM (#10098793)
Yeah that same line made me laugh a bit as well. "Your non-identifying, SUPER personal, burned onto your phones hardware, is never going to change Mac Address is recorded as you walk by."

I think the idea is a great one, it's unfortunate there isn't a better way (that I can think of atm) to do it, or like you said just some transparency on what they do with it. As simple as: "At the end of each day the encrypted mac addresses are completely erased from our system."

Seems like they do keep the info though, it says the Cincinnati airport kept it and used it for data analysis. In the end, I think this kind of thing most people will be okay with foregoing a bit of privacy for.

Edit: Interesting article on mobile MAC addresses down the comments: https://news.ycombinator.com/item?id=10097882#up_10098108

Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by mlaretallack on Friday August 21, 2015 @01:49PM (#10099091)
I work in the traffic industry and over the last 8 years I have seen the rise of WIFI and Bluetooth journey time monitoring kit and after looking at every solution, I have found that the method of "encrypting" the data has always been just a MD5 hash, or SHA if you are lucky. With with result Hash just been http'ed over to a server on the internet. This usually leads to to question, "OK, so I can just hash the victims MAC address and the look for that in the data stream to find out where the person is instead of just using the MAC directly?" The same is done for ANPR based systems. The word "encrypted" seems to be added to some how make it secure without the solution being secure.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by mlaretallack on Friday August 21, 2015 @01:46PM (#10099075)
I work in the traffic industry and over the last 8 years I have seen the rise of WIFI and Bluetooth journey time monitoring kit and after looking at every solution, I have found that the method of "encrypting" the data has always been just a MD5 hash, or SHA if you are lucky. With with result Hash just been http'ed over to a server on the internet. This usually leads to to question, "OK, so I can just hash the victims MAC address and the look for that in the data stream to find out where the person is insteadvof just using the MAC directly?"
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by dperfect on Friday August 21, 2015 @02:14PM (#10099253)
I understand the concern, but isn't your face effectively just as personally identifiable, recorded in far more locations, and arguably much more personal because it can't be easily replaced/changed?

That doesn't make either situation okay for privacy-conscious people like you and I, but I personally feel like MAC address tracking is a relatively minor concern when it comes to privacy.

Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by jschwartzi on Friday August 21, 2015 @03:55PM (#10099838)
There aren't any commonly available tools that let me search a large dataset for a face.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by eric_h on Friday August 21, 2015 @06:23PM (#10100621)
Perhaps not commonly available, but they most definitely exist.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by gtremper on Friday August 21, 2015 @07:31PM (#10100868)
I'm sure Facebook can do this if they wanted.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by eric_h on Sunday August 23, 2015 @12:55AM (#10104723)
I'm pretty sure they do, whether you want them to or not.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by omouse on Friday August 21, 2015 @12:29PM (#10098582)
Aren't MAC addresses supposed to be globally unique? That's the most personal it can get, right?
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by riffic on Friday August 21, 2015 @03:47PM (#10099801)
"supposed to be", but not really. There are no measures to prevent MAC collision other than a manufacturer assurance they won't duplicate the addresses.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by justinlardinois on Friday August 21, 2015 @02:40PM (#10099455)
Just to be clear, they're using encrypted in a layman's sense; according to http://www.blipsystems.com/wp-content/uploads/2014/10/BlipTr..., it's hashed with SHA256.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by wyager on Friday August 21, 2015 @02:48PM (#10099492)
For those unsure, SHA256 is worthless here. There are few enough MACs and SHA2 is fast enough that it's easy to reverse.
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by misnome on Friday August 21, 2015 @02:11PM (#10099239)
I was under the impression that iOS devices now use a random MAC address when searching for WiFi access points - so although you could still make estimates, at least based on people not using iPhones, wouldn't this alleviate the privacy issues?
Re:JFK Displays Actual Wait Times Using Beacons That Monitor... by sixothree on Friday August 21, 2015 @01:59PM (#10099162)
I suspect this statement is just as innacurate

> The BlipTrack solution ... detects Bluetooth or Wi-Fi devices in “discoverable” mode