News for hackers. Stuff that matters.
Re:OnHub by twoodfin on Tuesday August 18, 2015 @12:28PM (#10080120)
Hard to believe there's a huge market for $199 WiFi routers, no matter how sophisticated.

On the other hand, even a sprinkling of installations is probably pretty valuable if it allows Google to derive more accurate ISP performance numbers. There's got to be some benefit in having thousands of devices directly connected to the ISP's network on the consumer end 24/7.

Re:OnHub by chrisrhoden on Tuesday August 18, 2015 @12:46PM (#10080284)
If you're not spending at least $100 on a wireless router, you're probably giving up significant amounts of the performance you're paying for from your ISP. Routers are computers. The $40 units just can't handle modern usage patterns (multiple phones / tablets / computers with relatively high speed caps) very well.

It's my single biggest recommendation when people complain about the speed of the Internet in their home. More often than not, they're underspending on their networking equipment, not their ISP package.

Re:OnHub by dragonwriter on Tuesday August 18, 2015 @01:13PM (#10080515)
> More often than not, they're underspending on their networking equipment, not their ISP package.

Often, their networking equipment is part of the ISP package because the ISP wants to provide a seamless experience, and doesn't even provide easy access to the information necessary to use your own equipment.

Re:OnHub by RobotCaleb on Tuesday August 18, 2015 @01:19PM (#10080558)
I don't even know what this means. Are you saying that your ISP doesn't allow you to plug standard ethernet devices into their lines? I own my own modem and router and do what I want with them. I don't follow you.
Re:OnHub by dragonwriter on Tuesday August 18, 2015 @01:26PM (#10080614)
> Are you saying that your ISP doesn't allow you to plug standard ethernet devices into their lines?

Using your own router rather than the ISPs preconfigured router requires more than just plugging a personally-purchased router into their line (even in the simple case where you aren't using the ISPs bundled cable/phone/internet service that's all delivered through a common system.)

At least in the simple case, someone with modest technical skill can figure out how to get that information relatively easily, but most ISP customers aren't even modestly technical.

Re:OnHub by wging on Tuesday August 18, 2015 @01:45PM (#10080805)
When I've had a cable modem, all I've had to do is connect my router to the modem via Ethernet. When I've had modemless service via Ethernet jack, all I've had to do is connect my router to the wall Ethernet jack.

So what are you talking about? Purchasing your own cable modem? Or something else that I've never had to do?

Re:OnHub by marvy on Tuesday August 18, 2015 @02:00PM (#10080931)
If you have DSL, the modem and the router are the same box, so if you want your own, you have to throw out the one the ISP gave you, and configure yours by yourself. In practice, I bet you could just call up the ISP if you're having trouble, but I agree that an ISP has an incentive to give you a good unit to start with.
Re:OnHub by cbhl on Tuesday August 18, 2015 @05:20PM (#10082279)
Most modem-router combos support "bridge mode" which allows you to connect your own router's "Internet/WAN" port to one of the the modem-router's ethernet ports and have it initiate PPPoE to your ISP.

If that doesn't work, you can also just connect the modem-router's ethernet port to a LAN port on your own router, and just disable DHCP/DNS on the router.

My experience is that the DSL modems only contain mid-range routing and wi-fi equipment (10/100 switches instead of Gigabit, 802.11 b/g/n that run with one antenna instead of six and only on 2.4 GHz band). It's adequate to get things "working" but if you pay for a faster VDSL plan (usually 25 or 50 Mbps packages) you can see improved Wi-Fi performance with the right third-party router and laptop/phone.

Re:OnHub by dragonwriter on Tuesday August 18, 2015 @02:26PM (#10081133)
> If you have DSL, the modem and the router are the same box, so if you want your own, you have to throw out the one the ISP gave you, and configure yours by yourself.

The usual recommended approach I've seen is to keep the ISP-provided modem/router, plug your router into it, and make certain configuration changes on one or both of the devices (though, for the same ISP, I've seen conflicting information on the correct configuration changes, with clearly dated assumptions, but still possibly correct as far as it goes information, in the official information from the ISP.)

But my basic point is that for most home users, they aren't conceptualizing it as spending separately on "internet service package" and "network hardware", the network hardware is part of the internet service package.

Re:OnHub by mikeash on Tuesday August 18, 2015 @02:17PM (#10081058)
I haven't had DSL in a while, but when I did, the ISP just provided a modem with a phone line connector and a single ethernet connector. There's no requirement for DSL to bundle the modem and router.
Re:OnHub by dragonwriter on Tuesday August 18, 2015 @02:33PM (#10081191)
Sure, lots of DSL ISPs used to do that in the old days before WiFi was a common consumer demand, and some still might.

Now, the ISPs that are using DSL (e.g., AT&T U-Verse which uses VDSL2 where it isn't FTTP) seem (from what I've experienced and seen with other people that have DSL-based service) to deploy all-in-one modem/routers (and, when they have services like TV and Phone as well as basic internet, to run them through the supplied all-in-one box, as well.)

> There's no requirement for DSL to bundle the modem and router.

Sure, its not a theoretical requirement, just practically what ISPs seem to do now.

Re:OnHub by mikeash on Tuesday August 18, 2015 @02:50PM (#10081311)
Gotcha, I thought it was being presented as some sort of technical constraint.

An interesting variant on all of this is FiOS, which is often brought into the house on coax which plugs into their router. It's possible to buy something that will bridge the coax to ethernet, but they're pretty hard to find.

I think this might be going away as they increase speeds. I originally had the coax, but then they replaced it with ethernet coming in to the house. I kept their router anyway because it actually seems to be pretty good.

Re:OnHub by RobotCaleb on Tuesday August 18, 2015 @01:28PM (#10080641)
Since when? When I got my new router, I plugged it in and was online. I did some configuration (and flashing) afterwards, but it certainly worked when I plugged it in. Isn't that the point of consumer products?
Re:OnHub by wvenable on Tuesday August 18, 2015 @01:22PM (#10080582)
My ISP provides an integrated modem/wifi router and they don't provide a bridge mode. I've long given up trying to fight against that with my own equipment.
Re:OnHub by exelius on Tuesday August 18, 2015 @01:27PM (#10080629)
It's not even a battle worth fighting; your average consumer router is significantly less powerful than what the cable company gives you. Even if you do get it in bridge mode, you'd need something more than a $200 consumer router to get the max speed out of it.
Re:OnHub by snuxoll on Tuesday August 18, 2015 @01:45PM (#10080809)
So not true, the RT-AC68U will walk circles around any eMTA an ISP will give you. The eMTA's cable companies give are expensive because a DOCSIS 3.0 modem is already $80 on average, adding a VoIP gateway and WLAN router plus a sufficient profit margin adds up.
Re:OnHub by exelius on Tuesday August 18, 2015 @02:06PM (#10080972)
Well, basically, a $200 home router will peak well before maxing out a 150 mbps connection unless you turn off all the QoS, UPnP and security features... but at that point you're better off just using the eMTA (which can handle the speed because it never had any of those features in the first place).
Re:OnHub by snuxoll on Tuesday August 18, 2015 @02:36PM (#10081211)
Once again, not true. NAT and QoS are the most expensive tasks a consumer router will perform, and even at 1Gbps it's rather mundane work even for a slower CPU (the 600MHz CPU in the RT-AC66U is sufficient).

Once you start looking at the latency requirements to achieve 10GBps interconnects you're going to have issues with what you can reasonably expect from the $200 price range, but consumer networks have a long ways to go before that's going to even need to be thought about.

Re:OnHub by dublinben on Tuesday August 18, 2015 @08:34PM (#10083063)
This is completely untrue. Even a sub-$100 TP-Link router will provide 800+ Mbps routing, far higher than a typical broadband connection.
Re:OnHub by hueving on Tuesday August 18, 2015 @07:47PM (#10082919)
I think you're overestimating the price of hardware required to handle 100 mbps. Broadcom asics in datacenter switches handle on the order of 100gbps and they are on the order of $100.
Re:OnHub by ironlady on Tuesday August 18, 2015 @12:40PM (#10080221)
I spent $150 each or something like that on my apple routers about 5 years ago, they both are still running strong but since technology has of course advanced so much in the past few years, I would spend that on a router with the hope it lasts the same time.
Re:OnHub by jcastro on Tuesday August 18, 2015 @12:33PM (#10080164)
It seems that with AC being more mainstream that prices north of $250 are becoming a thing. I was surprised it was only $199.
Re:OnHub by Artemis2 on Tuesday August 18, 2015 @01:20PM (#10080565)
Apple's Airport Extreme sells for the same price and supports AC. I wouldn't expect Google to try to sell something more expensive without Apple's care for details.
Re:OnHub by rsfinn on Tuesday August 18, 2015 @04:15PM (#10081844)
Obligatory "buy refurbished equipment from Apple" comment (full manufacturer's warranty; I've never had any problems). The refurbished Airport Extreme is $129, which seems like a pretty good deal. Try poking around under "Mac Accessories".
Re:OnHub by rattray on Tuesday August 18, 2015 @12:45PM (#10080280)
AC?
Re:OnHub by chrisrhoden on Tuesday August 18, 2015 @12:47PM (#10080294)
Like 802.11 B/G/N/AC
Re:OnHub by tibbon on Tuesday August 18, 2015 @02:56PM (#10081354)
I bought some 802.11AC router from Asus a few months ago for around that much, and I was absolutely floored at how much better it was than my old WRT54GS that I had been using with DD-WRT for years. Now I'm easily able to download consistently at 16MB/s from the internet, and do large file transfers at even higher rates between devices at home. I've mostly stopped using gigabit ethernet at home even because it's so fast.
Re:OnHub by will_work4tears on Tuesday August 18, 2015 @12:44PM (#10080264)
I paid almost that for my current router[0]. I think mine has better specs, even not being an AC (few, if none, of my devices use it anyway). Google's hub has no USB ports, no guest wifi (from what I can gather). Mine, however, has those things, though to be honest, most of the time, the printer or USB storage doesn't quite work right, though that could because I use a Mac and the driver's aren't supported as well.

[0] http://www.amazon.com/gp/product/B005KG44V0?psc=1&redirect=t...

Re:OnHub by oz on Tuesday August 18, 2015 @01:56PM (#10080895)
It has a USB 3.0 port:

https://on.google.com/hub/#specs

Re:OnHub by will_work4tears on Tuesday August 18, 2015 @02:54PM (#10081345)
Ah, my mistake then, I looked at the specs but didn't notice it for some reason.
Re:OnHub by publicfig on Tuesday August 18, 2015 @01:30PM (#10080653)
https://lh3.googleusercontent.com/c_gletsUWTM-5b3oIpHD7fFXfa...

It does seem to have one USB port, though I'm not sure what it's for.

Re:OnHub by heywire on Tuesday August 18, 2015 @01:44PM (#10080802)
That's about what I paid for my ASUS RT-AC68P. I went through a couple different sub-$100 routers (Belkin and Linksys) before settling on this one. I've not yet had to reboot it for any reason other than configuration changes, something I definitely couldn't say about the others. Previously I was using a Buffalo Wireless G router with DD-WRT, but it finally gave up the ghost after about 7 or 8 years of service. Having built in samba / FTP / DLNA support of USB drives makes it worth the added expense, as does QoS and SSH access. I'd highly recommend it.