wicker
I started out on Jekyll on Github Pages because I needed a place to put photos and I don’t use Facebook, Flickr, Google Plus, etc. It’s super simple, serving the photos on Smugmug for a yearly fee, and it works just fine for friends and family when I send a direct link. It feels manageable in a way that social media (for me) often doesn’t.
I’m moving from hardware to software and it’s been a struggle to organize my resume and portfolio. I’m pleased with how it looks now with the sorting by category.
And, of course, I had to go and get a writing hobby where nobody wants you to post anything online because they want first publishing rights. So I have a page where I guess I’ll just list things I’ve exhibited or published when I really want to post the poems or articles themselves. It’s the writing version of “but the client insists this remain closed source” when I just want to share and geek out about everything I make. :(
Q&A: http://i-base.info/qa-on-the-partner-study/
Full study: http://jama.jamanetwork.com/article.aspx?articleid=2533066
Quoting from the abstract:
"In a randomized double-blind study (n = 127), science faculty from research-intensive universities rated the application materials of a student—who was randomly assigned either a male or female name—for a laboratory manager position. Faculty participants rated the male applicant as significantly more competent and hireable than the (identical) female applicant. These participants also selected a higher starting salary and offered more career mentoring to the male applicant. ... Mediation analyses indicated that the female student was less likely to be hired because she was viewed as less competent."
No Accident: Inside GM’s deadly ignition switch scandal
Re: using mains power lines... I actually have a friend who might be able to answer that, so I'll ask him. We were also considering transmission towers, since plenty of the hikes I know will take me across a clearcut for the transmission lines, and I can get some altitude with good, unobstructed views.
I'm getting interested in super low frequency signals so I looked up the E202 Very Low Frequency (<10kHz) receiver[1] and laid out/built a variation of it.[2] Right now the whole thing is a broadband receiver with no antenna (obviously) and the whole circuit board assembly is functionally acting like a microphone. I can hear when I touch any component or move my hand around in the air. I'm going to add a 60Hz notch file and then take it out to the middle of nowhere.
I think it would be awesome to go find a pipeline to use as an antenna...
Next project is to take my BlueROV[3] and build a hydrophone array[4] for it so a friend and I can see if a underwater acoustics engineer friend and I can use it to track other objects (like a remote-controlled toy boat) in the water. I've been doing some Kivy visualization of an accelerometer and gyro (MPU9255) and I think we could use matplotlib's interactive mode or something in Kivy (maybe) to visualize it all in realtime.
There's nothing cutting edge here but I've done a bunch of radio frequency (RF) stuff like GPS and WiFi and I'm really enjoying how tangible audio seems in comparison. Just having fun with low frequencies, basically.
[1] http://www.vlf.it/romero2/explorer-e202.html
[2] https://github.com/wicker/e202var-natural-radio-receiver
[3] https://www.bluerobotics.com/store/rov/bluerov-r1/
[4] http://www.dosits.org/files/dosits/hydrophone_instruc_w_imag...
One of the downsides of accepting gerber files is that a lot of folks rename to match our suggested naming pattern to be sure the files work, so it can be tough to determine which CAD package was originally used. Plus, we still get gerbers from some rare ones like TraxMaker 2000 or Ranger 3.
The only thing I'd add is that anybody who's thinking of switching should treat it like picking up a new, very different programming language. It took me three weeks with several boards and a video tutorial series to finally get comfortable that I can use the tool without constantly looking up hotkeys and documentation (which is really good).
The thing I recommend is to never assume that the way KiCad is doing something is the only way, and to Google aggressively. A good example is the 'Move' tool vs the 'Grab' tool. I watched a guy nearly swear off KiCad because he only used Move and never Grab, so he was moving wire segments individually. If he'd read the documentation or searched for the answer, it would have been there. These tools are not particularly intuitive.
The best part of taking some dedicated time is that now I have 2-layer and 4-layer templates with my design rules, custom project settings, and a bunch of custom hotkeys. It makes all the difference.
We're also working on being able to take .kicad_pcb files directly, in the same way we take Eagle .brd files now. In the meantime, I wrote up a page with some KiCad screenshots and instructions for how to generate the gerbers and drill files we need. [1]
The major issues we see can be solved by checking the Protel naming format option so we can detect layers correctly, and by putting the board outline by itself on the Edge Cuts layer.
Does this actually work for you? Do you open the app and it says "Don't drink, fuckface." and you're like "oh, right, OK. I won't." Or do you just blow right past it? I used to work in a shop with gruesome safety posters on the wall at work but after a couple of weeks, I stopped noticing them. I figure this would turn out to be something like that.
Right below that, it says "The workshop material here was presented in the Spring of 2011 at the Harvard / Smithsonian Center for Astrophysics. A range of about 25 to 50 people participated in the different workshops, which were 1.5 hours in duration. Based on our experience a 2 hour slot would have been more reasonable to allow time for the exercises and discussion."
It sounds like this was a series of workshops that were presented, and the material collected and released as reference for anybody else who wants to take initiative in their own communities.
This brings up a good question, though. What are the reasonable expectations for people who make their reference materials online after they're done with the initial conference talk or workshop, and have moved on to something else?
I'm having trouble finding other people who've read him and want to talk about his books, though.
Massive Fire Engulfs Mexican Oil Rig, 4 Dead
Depression isn't just an attitude, it's an actual chemical imbalance. It's something that happens to all kinds of people and investigating it might lead you to a fix. I've had periods where I've felt that lack of joy or interest and I wondered why I even bothered, but I got some help and now in retrospect I can tell it was terrible to live like that. At least talk to a doctor and bring up the possibility.
Tons of people around you struggle with the same thing even while they look so awesome and successful, especially if you're in the valley. I know it feels like you're totally alone but you're really not. At least investigate that your brain chemistry might be a little out of sorts.
I looked and generally agree with that suggested reading order and I started with the Watch series. I'd pick one of those series, give the first book a shot, but if you hate it maybe give one of the other continuities a shot before you throw in the towel. I hated the Rincewind novels and it took me a while to come around to the Witches (now I love them) but I thought the Watch books (starting with Guards! Guards!) to be absolutely fantastic.
He's written a lot of books of varying quality over a lot of time so I always warn people to be prepared to give him a second chance.
I met him once when I was a teenager. He was really kind as well as insightful and funny.
I would feel very awkward waiting until the last minute and certainly if they were on the edge of the goal, but in that campaign's case I canceled in the first two weeks and they made their stretch goal anyway.
I'm a hardware engineer so I'm just incredibly suspicious when really cool hardware pitches can't answer follow-up questions with sufficient details. Lesson learned: I'm an impulse buyer so I'm not allowed to pledge money on Kickstarter without waiting twenty-four hours and talking to a subject matter expert.
Send in the Weathermen
Brainpickings Review of Sara Maitland's How to Be Alone
I change up the image every few days but I try to have it point to something like the recent Orion launch or a trip photo from the Portland Hikers Field Guide. Instead of redirecting to Google's homepage (which is what I did at first), seeing the image gives me positive reinforcement to pause and be more mindful about what I'm doing, where my head is at, etc.
It's been an enormous help in instilling my habit to stay focused.
Can you talk a little more about the ebooks? How did you choose a topic and could you point at a useful reference or two for how to market?
I didn't think it would matter to read this from Tim Cook but it turns out I feel very encouraged by his words. When he says "engineer" among his attributes, well, I'm also an engineer and it gives me a sense of possibility.