robinhartley94
It's worse because you have to move your right hand back and forth between typing commands on the keyboard and clicking the mouse.
At the time, I programmed an Arduino with a lot of the common pieces of text I was typing, and then wired the Arduino to a keypad so I could press a key and get it to type the text for me.
Have you had a similar problem in your engineering job? If so, how did you try to solve it?
Ask HN: Engineers of HN, which tools and tech help your computer productivity?
Hi engineers of HN, I’m interested in building software to help boost your productivity, particularly when using your computer.Therefore, I was wanting to ask the two following questions.If I get enough answers back, I’d like to write this up into an article, which I will post back to HN once done. You are welcome to answer the questions in the comments below, or using the Google Form I’ve set...
On the smartphone side, I think we use them very differently - you wouldn't do engineering design on a smartphone, for example, so this is maybe outside of the use-case I was thinking about. I don't think touch screens are that effective either - typing on them is a pain!
Your point about VR is very interesting though because people are starting to do complicated tasks like CAD and graphic design through VR. This does mean it's able to do tasks that typically people would spend a lot of time sat at a desk typing and clicking to achieve.
Having many 'virtual' computer monitors displayed through a VR or AR headset is not something I've ever thought about, but is a really cool possibility. Do you know of any examples?
The above argument is kinda the founding philosophy so I want to make sure it's sound logic!
Ask HN: Do we need better ways to interface with our computers?
In the mid 80s, personal computers were released with graphical user interfaces – they were controlled by a keyboard and a mouse. Take the Amiga 500, for example (https://en.wikipedia.org/wiki/Amiga).In the last 30+ years, I think we can all agree that computers have become exponentially more powerful, but the way we control them (QWERTY keyboard and a mouse) has stayed the same.Therefore, I...
I have removed the email signup and allowed a direct download. So far, the rate of downloads has gone up by a factor of between 5 - 10 times. Hard to know precise numbers at this time but it's looking good!
I don't have large enough numbers of users to know how this will impact on conversion, but it follows logically that if the product is the main selling point, getting users to engage with it in the easiest way possible can only be a good thing.
I'm now looking at replacing the on-boarding emails I was using with an in-app on-boarding process.
Thanks for your help with this one again!
Thanks for your time an constructive criticism!
Cheers, Robin
Ask HN: Should a software free trial be behind an email sign-up wall?
Hey, I'm looking for people who have provided a free trial of digital download software before. Did you put your free trial download behind an email sign-up wall?I currently have an application I'm working on that requires people to provide their email address into a form before they're allowed to download the free trial software.I do this because it allows me to directly reach out to users,...
Please let me know what you think of the software and whether it would be useful to you in automating tedious and repetitive computer actions.
Numpad Superpowers
You drag and drop commands like "type text" and "open folder" onto each of the buttons of your numpad. When you then press that numpad button, your automation is triggered!
However, to let people hook up their macropads, I made it also listen out for the keyboard shortcuts ctrl + alt + 1, ctrl + alt + 2 etc. as numpad button 1, numpad button 2 etc. respectively.
So if you can make your macropad do the keyboard shortcut ctrl + alt + 1, then my software will behave exactly the same as if you pressed numpad button 1 and will trigger the associated automation.
Let me know if you have any questions about your specific use case!
Give your macropad a new 'brain' with my drag-and-drop automation software
Drag-and-drop keystroke automation software (for Windows)
Hey, if you're interested in using keystroke automation to improve your productivity, then you might really like this software I've developed.It's called Numpad Superpowers (https://numpadsuperpowers.com) and it turns the number pad on your keyboard into a powerful automation tool. The main feature is a drag-and-drop graphical editor, which you use to program what each of the buttons on your...
I'd also be delighted to hear your thoughts/feedback on this - I hope it helps your productivity like it has for me!
Assign automation/macros to your numpad with a drag-and-drop editor
Leveraging Bots for Success on Hacker News
The Amazing Shortcut Keypad – Crowdfunding Now
Drag and drop editor like Scratch, but for Python – all coded by a 13 year old
Hi everyone, I’m posting this on behalf of Josh who has created EduBlocks – a drag and drop interface for Python which helps young coders make the transition from Scratch to Python. You can check it out here: http://edublocks.org/Despite being only 13 years old, Josh has created this project and released it Open Source with the intention of helping other people his age get into coding. He is...
These are the main parts really. I have spent nearly 1000 hours developing the software and the designs so it's really quite valuable in itself.
Ahh that's pretty cool, sounds like you've differentiated yourself - keep it up!
In fact, the hardest bit is just designing a 3D printed case for it but that will only take an afternoon. I will look at adding this to the crowdfunding as a stretch goal.
This way it works out cheaper, more flexible and generally better for the end user. It also avoids things like import taxes, shipping costs and manufacturing delays.
Instead, I have created 4 designs at a range of different prices, all based around easily available components.
I will distribute software, 3D print files, circuit board designs, build instructions, and tutorials so that anyone can build their own. It will be completely open source.
This means you can tweak it to your own needs, use already purchased components and make as many as you like. I think it works out better for everyone :D
It also saves me the trouble of coordinating all the manufacturing and allows me to focus on the bit I like and am good at - improving the product.
I like the look of Riffpod, neat little product. Got to say I've done something similar with iRigg but no doubt there is plenty to set it apart. Good luck!