News for hackers. Stuff that matters.

oxplot

Re:NSW Digital Driver Licence on Thursday November 07, 2019 @04:47PM (#21477658)
The app itself recommends only showing the officer your screen, and not handing your phone over. As for Android, you can also pin the app before handing it over, if you so wish to. Pinning is a feature whereby the foreground app is the only app that can be interacted with until the next time you unlock the phone. All notifications are also hidden.
Re:Biometric YubiKey on Thursday November 07, 2019 @12:36PM (#21475257)
You missed my point entirely. So I repeat it here: most attacks are online attacks, remote in nature, so even a physical security key without fingerprint reader is still superior to passwords and would mitigate majority attacks. Webauthn [1] is not the same as 2FA. That's a different standard and it is meant to replace passwords. The fingerprint reader on this new yubikey is an additional measure against someone in close proximity of your physical key bring able to use it.

[1]: https://en.m.wikipedia.org/wiki/WebAuthn

Re:Biometric YubiKey on Wednesday November 06, 2019 @06:14PM (#21468619)
What most comments are missing here is that webauth is a replacement for passwords. You know the "123456789", "jim1966", "monkey123", etc. With this key, remote attackers are completely neutralized. That's the bulk if not almost all attacks usually.
Re:Ask HN: What to do after the workday? on Friday November 01, 2019 @06:43PM (#21424458)
Some ideas based on my own personal experience:

* Lose the TV (it opens up space, saves electricity and you can put plants in its place)

* Improve and optimize your living. Eg adding a hook somewhere to hang stuff. Make an economic shower caddy. Install accessible power points.

* Cook. For a tired mind, cooking and cleaning afterwards is very soothing.

Why are the only two options to let ads through or reject them? How about, fact check them and visibly mark them as being potentially false and a link to more details. This should make both sides happy: Zuck who believes the public should decide for themselves, and the rest.
Re:Show HN: USB PD Stand-Alone Sink Controller on Saturday October 26, 2019 @10:02PM (#21367464)
I have two devices at home with the positive contact on the outer ring!!!
Re:38 People are looking at this post right now on Sunday October 20, 2019 @05:29PM (#21307291)
%99.999 of people aren't going to look up the legitimacy of this. Why spend development effort where the likelihood of getting caught is so low. And even when "getting caught" isn't that big a deal.
He is the lead designer! So he must be interested quite a bit to do that on day-to-day basis.
Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @06:50PM (#21276872)
This board can only consume power. ST sells chips which act as USB PD supply but they're only interface chips. You'll need a DC-DC converter and charger circuit as well which is usually complicated with dozens of components and tricky layouts.
Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @06:02PM (#21276420)
> I find the other comment about a programmable output voltage in 50mV increments a little amusing

To clarify, when you program the chip, you set a voltage with 50mV resolution and a lower and upper percentage bounds that you'll accept. The minimum percentage is 5%. So for instance, at 5V, you can't narrow down the range to less than 0.5V (4.75-5.25v).

Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @12:01PM (#21271847)
Had never heard of GaN. Googled and they are amazing! Thank you.
Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @11:38AM (#21271545)
Most cars provide >120watt power through the cigarette lighter socket. It's just that no one has yet made a USB charger with that output power presumably because no single device requires it yet.
Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @11:34AM (#21271505)
Yes, it can be reprogrammed and yes, it works between power cycles.
Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @09:24AM (#21270043)
Yes! Exactly what happened with my Pixel phone. The cable would fall out after a minute. Took a toothpick and a few minutes to get the dirt out and now it's as good as new.
Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @09:09AM (#21269922)
I knew about the cables on eBay but wow, didn't know about Lenovo's official one. Thanks!!

Also the other project is pretty cool as well. Will check out the components there too.

Re:Show HN: USB PD Stand-Alone Sink Controller on Wednesday October 16, 2019 @09:05AM (#21269888)
Yes, just sign up and create a project and enter some parts. It tells you instantly the cost of each.
Re:USB-C Has Finally Come into Its Own on Friday October 11, 2019 @02:46PM (#21227198)
There definitely could be one out there, but given the size of the Apple charger, power output performance, build quality and ubiquity, I think it'll be hard to find an alternative that costs less. A lot of expensive components goes into making this charger. I can tell you from my experience of trying to build a similar supply, that's not even an AC-DC circuit, that the components alone cost $30 USD. Even at Apple's production scale, it'll most likely still cost ~$20. That's 25% of the retail price. I'm constantly amazed on how they manage to make them so cheap!

But all the attributes I mentioned could be irrelevant to many. If you carry a 30 liter bag around, double the size of charger won't make a difference. If you're powering lights, output ripple doesn't matter much and so on.

Re:USB-C Has Finally Come into Its Own on Friday October 11, 2019 @03:29AM (#21222298)
I had a similar issue with my Pixel Phone's USB-C socket. The Apple's USB-C cable would fall out on its own after a while! Turns out, there was so much lint from clothing trapped at the end of the socket that the cable couldn't latch properly. Took a toothpick and got the dirt out. The cable now clicks in quite pleasurably and stays there firmly. Thought I'd mention in case others are wondering.
Re:USB-C Has Finally Come into Its Own on Friday October 11, 2019 @03:25AM (#21222274)
I've used STUSB4500 [1] in my latest project. Super simple and low external component count. Cheap too.

[1]: https://au.mouser.com/ProductDetail/STMicroelectronics/STUSB...

Re:USB-C Has Finally Come into Its Own on Friday October 11, 2019 @03:17AM (#21222238)
USB-C can supply up to 100 watts of power at 20v and up to 5A current. At the moment, you can easily get your hands on 87 watt Apple charger which is a high quality and compact [1]. That's a huge amount of power. To put this into perspective, here are a few unsuspecting items that can be easily powered by Apple's charger (stuff around my apartment):

* A fairly capable soldering iron [2]

* Studio grade lighting [3]

* Prusa i3 3D printer [4]

* Emblaser Core Laser Cutter

Each of these devices come with their own power supply unit, most of which are bricks at least twice the size of the Apple's charger, while most likely of lower output signal quality (e.g. higher ripple). It'd be great if all that waste could be replaces with a USB-C port!

That's why I'm currently working on a PCB kit which can be programmed to require a certain voltage/current from an upstream USB-C power supply [7]. It can then be used as adapter for (or embedded inside) devices that don't have USB-C power input. I'm hoping to sell the kit in the future. I'll be getting rid of my power bricks one by one while making them more portable with things like high power car chargers [6].

I'm also working on an upstream USB-C power supply (as a kit) [8] that can take any input from 10-35v and provide up to 100 watt output (which is currently rare).

[1]: http://k.sina.com.cn/article_1677177940_63f7b454001003fpl.ht...

[2]: https://www.weller-tools.com/we1010na/

[3]: https://www.amazon.com.au/Godox-SL-60W-Temperature-Continous...

[4]: https://shop.prusa3d.com/en/3d-printers/180-original-prusa-i...

[5]: https://darklylabs.com/emblaser_core/

[6]: https://satechi.net/products/72w-type-c-pd-car-charger-adapt...

[7]: https://imgur.com/a/GIia7Fo

[8]: https://imgur.com/a/ejbPBIT

Re:Dyson has scrapped its electric car project on Thursday October 10, 2019 @12:54PM (#21216723)
V6, V7 ... V10, these are all battery powered one handed vacuum cleaners that have zero setup time and few seconds to clean and put away. Is your $400 Miele in this category or are you comparing this with a wall powered vacuum that has 1000w and unlimited power at its disposal?
Re:Dyson has scrapped its electric car project on Thursday October 10, 2019 @12:48PM (#21216663)
> V6 - corded replacement

There is a huge range of corded vacuums that should not exist. I'd say this line is marketing crap. Even V10 isn't corded replacement across all corded vacuums.

> I need to clean things, I think I'm the target audience!

It all depends on your use case. If all you have is hard floor and a studio sized apartment, you don't even need a vacuum cleaner. Same way not every one needs a Ferrari to get from point A to B. Dyson's price range is certainly a good indicator as to why it's for a smaller market than your average vacuum cleaner.

Re:Dyson has scrapped its electric car project on Thursday October 10, 2019 @12:31PM (#21216443)
> I really can't understand why people are so enthusiastic about Dyson products

If you've used one and don't get it, you may not be the target audience. On multiple occasions, I've asked a friend of mine to try various products I use which I believe are excellent in many ways, only to be told that they were average or junk compared to what he uses. I believe what he uses mostly to be complete and utter junk! So I don't know ...

As far as Dyson vacuums go, V10 tipped over for me. The suction improved noticeably as did the run time. The bin is quite larger as well and my pet peeve, emptying the bin cleanly, is done perfectly in V10. I used to have to deal with hair in previous models. After V10, I never once touched the inside of the bin to do extra cleaning.

The motor head in V10 does not get hair in it. It's like magic!

As far as industrial design and feel of it goes, it's a pleasure to hold and use, so much that I sometimes over vacuum.

The warranty and support is the best as usual, even past warranty period.

Older »