nabilhat

Oh, that's a very specific crack. This is an extrusion error. The extrusion temperature is dropping too low while it's still over the internal die. The thicker peaks cool more slowly than the thinner flats, remaining at a weaker temperature longer, and they're pulled apart by accumulating contraction.

These cracks usually aren't obvious until they meet a conflicting load. For example, tapping threads up the end without supporting the work correctly. It's not like this is a load bearing part, they could get around this issue with a little care. Holding the work in a hex collet during tapping is cheap, adds efficiency, and would solve the problem. Sending feedback to the extruder is free and usually effective. Or maybe the product is moving well enough on brand equity that it's not worth bothering.

Reading summaries like this requires great skepticism. It's exceptionally difficult in this particular case to avoid directing results to arbitrary conclusions through cohort selection and grouping.

> analyzed IP address data in conjunction with LinkedIn data to cross-reference those working from home with those who formed new businesses. ... a title change and employment change on LinkedIn indicating a shift from being an employee to a founder.

Is this more likely to tell us something about the people and roles selected to work remotely, or an outcome of working remotely? At this scale the influences of each are absolutely inseparable. Do cohorts robustly account for education, experience, skillsets, tenure, etc.? The same values which improve one's ability to start a business strongly overlap with the considerations for employing someone remotely. I'm not saying they're comparing a "remote" cohort including developers to a "not remote" cohort including construction workers, but it's important to confirm.

It's always exciting to see this idea get revived for the first time in ninety years every ten years!

I've pedaled around on a couple variations of this design. Like everyone who had never ridden one but saw it on the internet, I also confidently imagined it would violently hurl me to the ground at the slightest provocation. I was wrong, which strangely seems to be a pattern for confident opinions I've formed based on things I've only seen on the internet. Having not been for a ride on this particular iteration, I will not post confident opinions about it on the internet.

The best (granted, of two...) version I've tried was semi-recumbent, with a standard geartrain and flevobike-style steering. The steering was a little weird at first, but I quickly figured out how to fully steer it hands free. Fully unloaded it was possible to tip it with hard front braking while turning, if you pitched your body weight into the effort. Loaded, it was absolutely nailed to the ground. You're just a mule winching a load down the road at that point. Sometimes it's fun to be a mule, piloting a weird bike-cart.

It turns out everyone flamewarring about stability on the internet forgot to get mad about drive wheel traction limits when pulling a load uphill. Which for me was a loading consideration rather than a problem. The underseat steering was brilliant for reasons I'd never thought about. But don't take my word for it, ride one and decide for yourself.

https://web.archive.org/web/20130309080557/http://hpm.catore...

The same reasons convenience stores sell single cigarettes, and people smoke them in their cars. Compelling cravings don't care about your externalities and don't want to wait. Lots of people don't want the people they live with to know how much they actually consume. Some people live with others who don't allow beer in the fridge for various reasons. Some have a housemate who can't be trusted around a surplus. Lots of people like to think of themselves as the kind of person who doesn't need to have a whole pack around, they just want this one and maybe another one. Depending on who you're hanging out with, sometimes it's nice to go to a BYO party and not contribute a surplus if that would get abused. And as always, who said they waited to get started until they were driving home anyway?

They caught on, but with more appropriate stainless alloys. Columbus has XCr, Reynolds has 931. Either can be brazed, or silver soldered into lugs, or TIG welded. Cinelli does mass production of the bike you're describing, minus the lugs.

304 can't be optimized to a point it'll compete with the vast range of other stainless steels that already exist. Something else will always be more corrosion resistant, or stronger, or tougher. 304 exists on price. It's quick, common, and cheap. This process makes 304 expensive, uncommon, and slower to produce. The proven concept is what's carrying value here.

This is supported in Excel. Select options > Data > Automatic Data Conversions > untick the boxes.

This isn't about Amazon's retail inventory. This is inventory owned by vendors, held in Amazon's care. Think about how this would play out in a consignment shop.

In the case of a no fault accident like a fire, paying back a different amount might be negotiable. A customer causing loss of a product on consignment might or might not have a pursuable compensation path. Under these conditions, the consignor still has a duty of care for their consignee's inventory while it's in their possession. Negligence contributing to loss from external cause tends to undermine negotiation of liability.

A consignor's own processes breaking a consignee's product is none of those things. Attempting to lowball repayment of loss entirely due to the consignor's own equipment and activities should be laughable. Successfully doing so with "show us your books" while actively competing with consignee's product shouldn't be possible without substantial regulatory influence on competing markets to constrain alternatives. There is no reasonable, functioning marketplace where this is feasible.

Indeed. The response to breach of contract has no place in a contract. Breach of contract is explicitly an event outside the bounds of a contract. Defining penalties within the contract attempts to place those events and outcomes within the terms of the contract, and can grant the other party leverage to avoid legal remedies.

However, some terms can help encourage payment on schedule. Early payment discounts encourage inexperienced AP to pay early. Late payment penalties signal highly strategized AP as to when the cost of not paying will intersect with their retained time value of money. If the person paying the bills is directly related to an owner, then despite whatever is in the contract it's usually a matter of figuring out how to help them do their job.

This sounds like a case of AP putting off payment because someone knows about time value of money and doesn't view their relationship with the vendor as having value they can lose. Establish due diligence to collect first, then: A letter written by an attorney to their legal team is cheap and usually an effective nudge. Asking a court to compell payment consumes little time and is not expensive, despite their latency courts are impatient and want you to not burn hundreds of legal hours over this. Selling the invoice to collections is a thing, it's not so large a sum to make that hard. But most of all, hire a competent trained accountant who has zero relationship to anyone with equity, and listen to them.

In this case it's a bad test thing.

The car impacted at a barrier splice which was not correctly joined. Barrier splices can come apart in the real world, but the fasteners will tear apart the sheet metal in the process. That splice gently deflected apart, like two sections of barrier were gently leaned against each other.

Two posts fall over on the initial impact, one on each side of the loose splice, without causing noticable specific damage to the car. The third post absolutely caved in the front end of the car before being violently bent down underneath, as properly anchored posts do in the real world.

This also isn't how this type of barrier is tested. "Barrier deflections listed below are results from crash tests with a 2,000 kg (4,400 lb) pickup truck traveling 100 km/h (62 mph), colliding with the rail at a 25-degree angle." More diverse testing done with seriousness would be a useful way to challenge if that standard continues to be appropriate, but this isn't it.

https://en.wikipedia.org/wiki/Traffic_barrier#Stiffness

A thermal fuse isn't for overpressure control, it's intended to trip before a physical overpressure control vents superheated steam. Both provide failover redundancy independent of operational heater controls.

There isn't enough detail of the boiler to tell if there's an overpressure relief valve. The boiler can't be made safe without one. If they're cheap enough to be standard in cheap knockoff moka pots one should be here...

This machine's wiring diagram shows an unlabelled shape wired in series with what might possibly be the heating element and a shape with "ssr" in its label. Which places the first unlabelled shape in the right place to be a thermal fuse or switch. If they're cheap enough to be standard in Mr Coffee machines one should be here...

Safety discussion in this project is conspicuously absent. Knowledgable users shouldn't be making assumptions like this about safety features. Assumptions and safety aren't compatible. Average users should be informed in detail about the safety features they're tasked with assembling.

McMaster also sells discs of tool steel and glass bearing balls... and carbide, and ceramic, etc. What if the bearing ball was carbide, even harder? What would happen if you reduced the hardness of a steel ball, which usually only requires normal kitchen oven temperatures? What happens if the materials switch places, say a hardened tool steel disc and glass ball?

Anyway, lots of options to safely experiment with material science concepts in very accessible and tweakable ways! No beryllium or foundry equipment required. I do think the massive, well fitted, rigid surface backing up the disc is important to constrain what this is demonstrating - plastic vs elastic deformation.

Taking this approach to a certain extreme, there's this video about making a bellhousing adapter to mate a Smart ForTwo EV motor to a vintage Jeep transmission. Raw materials include snowmobile clutch parts, scrap engine parts, and the housing from a dead old Skil saw. After all, once machine tools get involved, everything looks like a billet for something else, and casting is a far more accessible means of metalworking.

Much of the channel is about dragging decrepit artifacts of industry out of scrapyards or the reclaiming jaws of Nature and quite effectively repurposing or reusing the sound bits, which is something I personally find to be creative and satisfying.

https://www.youtube.com/watch?v=gz3OKeD4_hU

Cody of the Cody's Lab youtube channel has a video of what his voice sounds like after breathing each of the noble gasses. He certainly seemed to be experiencing symptoms afterward!

https://www.youtube.com/watch?v=rd5j8mG24H4&t=418s

It's a standard entry in the OTR long haul market segment, Volvo's equivalent of the Freightliner Cascadia and International Lonestar, all with their own take on the same set of features. Efficiency trim like aero and tires are standard, but marketing hypes it anyway and brags about how their new engine technology is superior when they do something as banal as switching to a different injector supplier.

The USA market supports a substantial truck hauling segment to fill the rail deficit. All they do is drive a thousand miles from warehouse A to warehouse B over and over, so aero between cab and trailer that restricts tight maneuvers doesn't matter, LRR tires start to make sense since they never spend significant time on lower speed surface streets, etc. It's not like the USA is going to update (much less upgrade) rail and that truck market is fully saturated and primarily cost sensitive, so actual disruption only adds risk.

It's a design error from the start. The workaround shouldn't have happened, but is only one of countless ways this would have inevitably happened anyway. Glue has a lot of failure modes. Correct application can't be reliably tested non-destructively. Product variances are often very hard to detect. Degradation with age and physical use can't be reliably forecast.

Three pins on the back of that appearance plate that push into starlock style fasteners in the pedal are cheaper than the appropriate glue, faster to install than glue, more reliable, trivially verified, impossible to misalign, and that's why it's a common solution that auto manufacturers use in this exact application. This was a confoundingly stupid place to rely on glue.

A more powerful laser is only half of the equation for cutting metal effectively.

The laser only melts the metal, it doesn't move it out of the cut, and some metals can react in plain air to sputter back at the emitter optics. Gas is forced under pressure at the cut to clear it. With some metals and/or thinner (speaking from a commercial perspective) stock, you can get away with plain air at high volumes of normal air compressor pressures with good results if it's very clean and dry. Others require specifically reactive or nonreactive gases or blends of gases. That's true for most hot cutting processes though. Plasma usually consumes plain air to blow out the cut, oxy-fuel uses excess oxygen to reactively blow out the cut. Lasers with their extremely narrow kerf are more finicky, which can mean a surprisingly high consumables cost.

More powerful lasers also require the optical hardware to operate in a light vacuum. Plasma generated by dust and air itself will ablate expensive parts. Home shops shouldn't need that much power though. If you're cutting thick or difficult metals regularly, that's not a hobby any more.

Then there's the byproducts. Organics get blasted into all kinds of random organic-ish things that aren't great to ingest or emit at ground level near neighbors (PSA, this is true for current hobby lasers). Cutting metals can get really exciting if you don't clean often and thoroughly enough to prevent a critical mass of finely powdered byproducts. An iron or aluminum fire will wreck your laser. An iron and aluminum fire will wreck your laser, and whatever it's sitting on, and the concrete below that.

For things to get this far is a failure of accounting. Engineering may have set the stage, but it's accounting's job to respond appropriately rather than letting (or not seeing) this play out. Treating accounting unseriously is an extremely obvious, avoidable mistake that a mindboggling number of businesses make. A substantial portion of the finance and accounting industry thrives on cleaning up the outcome of accounting being pawned off on the owner's spouse / kid / niece / nephew. They'll figure it out, right? It's just math.

I was thinking, surely it can't be that stupid in this case, but then I checked. Who knows, maybe Geeta Gupta-Fisker really is a profoundly skilled financial wizard. The founder's / chairman's / CEO's spouse is always the wrong person to be managing finances for so very many reasons. At the very least the optics of undermining of a firewall between accounting and equity undermines trust in finance. Such a relationship inspires extra special attention from auditors and regulators when mistakes happen. It's a clear sign that leadership doesn't take accounting as seriously as they should. Yet nepotism keeps being a normal thing that happens often.

Many jurisdictions in the US have safety regulations specifically around steering. In some jurisdictions it's illegal to drive a car on public roads with steering that has no mechanical connection to the steering wheel. Some areas have a minimum steering wheel diameter that's larger than the cybertruck steering wheel's minor diameter. Some areas have laws requiring a minimum (multiple...) number of turns lock-to-lock. Many areas require your steering to be operable in the event of power loss (I'd bet that everyone on or near a road would like that too). DMV's and police agencies sometimes regulate what they independently perceive as safety problems regardless of law, if someone with the means to declare internal policy gets the urge.

And that's for all cars operating on public roads, not just registered, in an area. It might be legal to drive a cybertruck where one lives, but not in a neighboring city or state. Moving fast and ignoring regulations on Tesla's part only works for their customers until regulatory agencies encounter a reason to pay attention.

Not as a welder, as a welding workshop sole proprieter with employees, including children.

> He has 10 apprentices - aged between 12 and 20 - at the workshop where he is teaching them the skills of the trade.

> "Even as apprentices, he gives us 10,000 naira every month and a daily stipend for food."

That's $11.36 per month. How much does the owner keep if retained earnings meet or exceed a normal salary for an academic in Nigeria?

> Academics in Nigeria have long struggled on modest salaries, most earning between 350,000 naira ($390; £305) and 500,000 ($555; £435) a month

More than about 80%, if there are no other costs. This is a story about entrepreneurship, not a recognition of manual skill, or an expose of underpaid academics.

In fact here's the original pre-stolen video on Aliaksei's channel:

https://www.youtube.com/watch?v=bbRgH6C5Tkc

The seller's account is unaffected, including the full remainder of their scammy inventory in all its AI-nglish glory.

https://www.amazon.com/s?k=FOPEAS

The mole was whacked, but only slightly. The seller's account and remaining scammy inventory is still up. The offense here was clearly the embarassment to Amazon from a couple of examples of blatant incompetence, not the scam itself.

https://www.amazon.com/s?k=FOPEAS

25 years ago, I was spending just over 1/3 of my take home pay on rent. That used to be a normal thing that people could do, only 25 years ago.

The exact same apartment is listed today for over four times what I was paying then. The same job I had then now pays 25% more. Rent for the same apartment is more than that job's entire gross pay.

Except when it doesn't:

https://www.amazon.com/FOPEAS-Language-Context-referring-Inf...

The seller account's entire product list is a stream of scraped images with AI-nglish descriptions slapped on by autopilot. If you can cast thousands of lines for free and you know the ranger isn't looking, you don't need good bait to catch fish.

I'm less focused on downsizing, and more on avoiding unnecessary churn driven by (popularly assumed) design or (Hanlon's Razor and my assumption) incompetence.

I managed to keep an android smartphone going for almost 10 years. At less than two years the Google Play Store would devour the entire battery in 9 hours, so I deleted it, and battery life rebounded to 5-6 days with normal use. Better than new.

Other android system apps began to unobservably consume obvious quantites of data with telemetry, so I installed netguard to identify them. Once those apps were identified I deleted everything I could without breaking the phone, and battery life rebounded to 4 days after six years of use.

The local police recently acquired a secondhand stingray and circle varying parts of the county with it cranked up to maximum acquisition and retention, for reasons perhaps related to unfamiliarity with the concepts of discretion and nuance and subtlety. Newer phones don't care, they switch to bands that old stingray has never heard of. My old phone couldn't, and calls simply wouldn't connect in or out when a certain Cessna was overhead (verified tens of times on ADSB). Clumsy dragnet surveillance on top of reduced service in legacy 4G bands broke my old phone. It outlived the world it depended on.

So I repaired a secondhand, rather less old, broken android phone, and now I'm trying out LineageOS. We'll see how far this one goes. It seems like a lot of effort and specialized knowledge to keep a smartphone usefully functioning longer than a goldfish. It's frustrating. I'm not downsizing, I'm avoiding the accumulation of things I have to figure out how to hack for maintenance instead of for fun.

Mentioned in the video, but worth repeating. This one like many old appliances is ungrounded. What's wrong in this video is the suggestion to rely on neutral for ground. Neutral is not ground and shouldn't be relied on for electrical exposure safety. Not mentioned is the condition of the interior steel's plating. The galvanizing (at least zinc) and chrome are separating from the base metal in areas through oxidization and abrasion.

The design risks have value and are worth preserving, but "this device predates safety" is a real factor to bear in mind.