konstruktors
konstruktors on Hacker News
It feels very similar to Facebook UIs and everything under FB for Business (managing ads, Instagram comments, etc). Definitely because of React and the amount of client side rendering logic in general.
Which is crazy given how little interactivity and DOM state a site like GitHub actually needs to manage.
Posted by
konstruktors on Thursday July 02, 2020 @09:01AM
from the kaspars.net dept.
Posted by
konstruktors on Thursday May 14, 2020 @10:30AM
from the kaspars.net dept.
Exactly. And I haven't found cheap charge controllers that support the voltage range of Li-ion packs (like 12.6V for a 3S pack or 16.8V for a 4S pack).
It does use the built-in WiFi to connect to a WiFi network created by the mobile modem I placed at the neighbours house which has a permanent power supply.
I considered using a mobile USB modem attached directly to the Pi but that requires extra effort keeping it connected with something like a cron task that pings 8.8.8.8 and restarts the connection if there is no response.
100Wp is probably a bit of an overkill but it does help during the winter season when there are multiple days with almost no sun. Also, there is plenty of shading from the nearby trees so I wanted to be on the safe side.
It would be nice to log the power consumption and the battery voltage but I didn't do it for this project.
Author of the blog post here. I've used [this SIM800 Raspberry Pi hat](
https://www.itead.cc/wiki/RPI_SIM800_GSM/GPRS_ADD-ON_V2.0) and it requires some additional GPIO toggling to enable the modem after a power loss. [Here are the scripts](
https://github.com/kasparsd/remote-pine) for doing that and creating the PPP network interface.
The USB modems are nice because you get full control over the modem with the AT commands. I've used the Huawei E173 modem which can be easily unlocked and works great out of the box.
Posted by
konstruktors on Wednesday June 05, 2019 @03:39AM
from the kaspars.net dept.
Posted by
konstruktors on Sunday December 16, 2018 @03:22AM
from the github.com dept.
Posted by
konstruktors on Wednesday September 05, 2018 @09:17AM
from the kaspars.net dept.
It's 76Wh in 2016 vs 99Wh in 2015 -- a 24% smaller battery. To have the same battery time, it must draw 24% less current than it did with the 2015 model.
Secondly, we should always compare watts instead of amps unless we know the batteries have the exact same voltages.
For example, for a battery life of 18h it must draw 4.2W on average (76Wh/18h). I don't think that's possible because only the 2016 MacBook uses that little power -- 4.1W (41Wh/10h).
Posted by
konstruktors on Sunday December 25, 2016 @02:43AM
from the kaspars.net dept.
Posted by
konstruktors on Saturday December 26, 2015 @07:36AM
from the kaspars.net dept.
> And then you drop your key and lose it. Or it gets ran over by a car or something. Now what?
You can't have both, I think. With a physical key your only concern is the physical security of the key. One should print out the revocation certificate, though.
I don't think many people lose their home keys or get them run over by a car. It's just a matter of making that a priority.
I think it's time we finally move to generating and storing secret keys on secure elements (Yubikey, NitroKey). This way we only need to worry about the physical security of the key and nothing else.
No air-gapped machine and a random flash memory stick (for storing the backup of the private key) can be considered as secure as the secure element.
Posted by
konstruktors on Wednesday April 01, 2015 @06:37AM
from the driveeo.com dept.
Not sure, haven't tested it.
Posted by
konstruktors on Saturday February 14, 2015 @04:28AM
from the kaspars.net dept.
Posted by
konstruktors on Saturday August 09, 2014 @06:55AM
from the kaspars.net dept.
Posted by
konstruktors on Wednesday January 15, 2014 @08:19AM
from the kaspars.net dept.
Posted by
konstruktors on Tuesday August 06, 2013 @12:21PM
from the github.com dept.
Posted by
konstruktors on Tuesday April 02, 2013 @04:50AM
from the wproll.com dept.
Someone should port it over to HTML using canvas, native video and lots of javascript.
Posted by
konstruktors on Tuesday December 04, 2012 @10:13AM
from the konstruktors.com dept.
Posted by
konstruktors on Monday November 26, 2012 @08:07AM
from the show-hn dept.