News for hackers. Stuff that matters.

geo-tp

geo-tp on Hacker News

Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Sunday August 10, 2025 @07:16AM (#44854416)
already supported
Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @07:23PM (#44851299)
See here: https://github.com/geo-tp/ESP32-Bus-Pirate/issues/7
Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @05:33PM (#44850476)
It might have been poorly worded, English is not my native language, but there was nothing mean in my message. To put it more clearly, I meant: fork it and make a pull request to help me implement it.
Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @05:32PM (#44850460)
Both in a way. Bus Pirate, both the hardware and the software, is completely open source. It's not the same version, things are different, but it's largely inspired by it.

However, the entire implementation is new, it's not a copy

Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @03:05PM (#44849171)
Fork it and implement it then
Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @02:47PM (#44849036)
https://github.com/probonopd/irdb

See here for a very large database of IR signals that works with the firmware.

Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @02:42PM (#44848991)
The firmware supports about 83 IR protocols, but even with that, it's not mandatory that it works with all existing devices.
Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @02:21PM (#44848807)
That's nice, give me some feedback what you thought once you've used it
Re:ESP32 Bus Pirate 0.5 – A Hardware Hacking Tool That Speaks Every Pr... on Saturday August 09, 2025 @10:56AM (#44847002)
ESP32 Bus Pirate is an open-source firmware that turns your device into a multi-protocol hacker's tool, inspired by the legendary Bus Pirate.

It supports sniffing, sending, scripting, and interacting with various digital protocols (I2C, UART, 1-Wire, SPI, etc.) via a serial terminal or web-based CLI.

Modes for:

- HiZ (default) - I2C (scan, glitch, slave mode, dump) - SPI (flash, sdcard, slave mode) - UART / Half-Duplex UART (bridge, read, write) - 1-WIRE (ibutton, temp sensor) - 2WIRE (smartcard) / 3WIRE (eeprom) - DIO (Digital I/O, read, pullup, set) - Infrared (device-b-gone, send and receive) - USB (HID, mouse, keyboard, gamepad, storage) - Bluetooth (BLE HID, scan, spoofing, sniffing) - Wi-Fi (scan, AP, connect, sniff, deauth) - JTAG (scan pinout, SWD) - LED control (animations, set LEDs) - I2S - CAN

https://github.com/geo-tp/ESP32-Bus-Pirate