News for hackers. Stuff that matters.
Re:Intel delays chip-making changes by chucky_z on Thursday July 16, 2015 @01:23PM (#9898540)
From a purely seat-of-my-pants-im-trying-to-remember-college point of view, I believe the heat is caused far more by pumping tons of electricity, rather than physical size/layout.

A big problem (and also probably why they're so thin) is that at a certain size latency becomes a huge issue. This is where clock speed increases come into play (electrons move faster) along with die decreases (electrons can travel shorter distances).

If you can run 100mph, but you have to run 200 miles vs. someone who can walk 1mph, but only has to walk 10 feet... I wish I had some more concrete examples but I can't come find anything off the top of my head.

Re:Intel delays chip-making changes by t0mbstone on Thursday July 16, 2015 @01:48PM (#9898742)
Heat is caused by resistance when the electricity moves through the metal. The more metal the electricity is flowing through, the more material there is incur resistance and generate heat, correct? If so, then more layers = more heat.
Re:Intel delays chip-making changes by ars on Thursday July 16, 2015 @07:25PM (#9900472)
> Heat is caused by resistance when the electricity moves through the metal.

Sort of. But if you reduce resistance you increase heat since more current will flow.

On the other hand, if you increase resistance AND also keep the current the same then you'll get more heat. But! to keep that current constant you must increase the voltage.

So it's not so simple as "resistance = heat".

> The more metal the electricity is flowing through, the more material there is incur resistance

Depends on if the metal is in parallel or series. If in parallel, then the more metal the lower the resistance, if in series then higher resistance.

> If so, then more layers = more heat.

Right result, wrong method of getting there. More layers (which would be in parallel) would be less resistance. But less resistance means more current flow (since they'll keep the voltage the same), and more current flow means more heat.