News for hackers. Stuff that matters.
Re:After Moore's Law: how phones are becoming open-source by phkahler on Saturday July 11, 2015 @02:45PM (#9871047)
I was just thinking about the end of Moore's law. People in the industry will tell you they've been overcoming obstacles for decades, but there is a fundamental change going on. Previous obstacles were manufacturing: Reduced wavelength, double patterning, immersion lithography. Some were part manufacturing and part device change: SOI, strained silicon. But now we're seeing changes to the devices themselves: Tri-gate transistors and now IBMs SiGe material for 7nm.

That change to SiGe is to increase electron mobility. The material could have been used all along, but it has been easier to stick to the tried and true Si. The bottom line is that plain silicon is not really viable below 10nm. A material change to effect one parameter isn't likely to be useful for more than a node or two before the same problem arises in that material.

I'd say 14nm FinFET will be a long lived node just like 28 has been. Then 7nm SiGe will be a higher end node with higher cost. Perhaps there will be another at 5nm but that's going to be a long time.

The equipment manufacturers will need to stay in business so they'll start selling stuff cheaper to the lower cost players as development of new nodes stops. This will lead to more capacity at the advanced node. Every micro controller will be made at 28nm and have an FPU (I can finally abandon fixed point math). Every SoC with a GPU will be made at 14nm. And lastly, laptops and desktops will have 7nm parts that are very expensive due to the expense of different materials, light sources, and the number of masks.

That's my guess at the market over the next few years and lasting for at least 10 more years beyond that. It will be very interesting to see how all the players cope with this. Even ARM will suffer as their CPU license cost starts to become a problem in a world of cheap chip production.

Re:After Moore's Law: how phones are becoming open-source by narrator on Saturday July 11, 2015 @04:19PM (#9871410)
I can also to see the Chinese (Loongson[1]) and Russian (Elbrus[2]) processors start to approach state of the art process technology with progress slowing down. It's interesting how the developed world closed the 20th century with such a big lead in technology. It seems that the rest of the world is now quickly closing the gap.

[1] https://en.wikipedia.org/wiki/Loongson

[2] https://en.wikipedia.org/wiki/Elbrus_(computer)

Re:After Moore's Law: how phones are becoming open-source by minthd on Saturday July 11, 2015 @04:08PM (#9871362)
First , we don't need to wait, there are already microcontorllers for $1 with a floating-point unit.Also sleep current is rising greatly as one moves to new nodes - so some micro-controllers will stay on older nodes. But yes 28nm should be popular for mcu's - especially that now we have tools to package very tiny(sub mm2^2 dies) with lots of pins.

Anyway, today , and much more so in the future, microcontorllers will be commoditized(heck for most purposes today, many companies offer chips with low-enough power) and extremely cheap - and the determining factor will be software - and software ecosystem.

So the company who could come with with a great improvement to productivity and quality of embedded software developmet - and control that tool - would be in a very good place.

Re:After Moore's Law: how phones are becoming open-source by wtallis on Saturday July 11, 2015 @05:55PM (#9871710)
> Also sleep current is rising greatly as one moves to new nodes - so some micro-controllers will stay on older nodes.

How fundamental is this? TSMC has 5 different 28nm processes, so there's obviously some room to adjust things. Can't microcontrollers get effective power gating to keep idle power low when moving to smaller processes?

Re:After Moore's Law: how phones are becoming open-source by sliverstorm on Saturday July 11, 2015 @07:56PM (#9872028)
TSMC can tweak it all they like, but a smaller gate leads to higher leakage currents. Plus popular older nodes are still getting tweaked.

That said, you can still attain amazing sleep currents on modern advanced nodes. The catch is just that the best way to do that is with advanced design techniques, which require more design effort.

Re:After Moore's Law: how phones are becoming open-source by minthd on Sunday July 12, 2015 @04:30AM (#9872911)
>> amazing sleep currents on modern advanced nodes.

How low sleep current on a 40nm/28nm mcu would be with those advanced techniques ? can youplease estimate ?

Re:After Moore's Law: how phones are becoming open-source by sliverstorm on Sunday July 12, 2015 @03:18PM (#9874557)
Well, anywhere from full power to zero, if you design a chip that can flush its state to persistent storage and go dark. x86 chips exemplify this wide range, with many power states all the way from full power to shutting off the entire package.
Re:After Moore's Law: how phones are becoming open-source by minthd on Saturday July 11, 2015 @06:12PM (#9871758)
You can't power gate sram, or device state registers. That's like reset.That's a large fraction of the chip.

How fundamental - i'm not sure.

[deleted]
Re:After Moore's Law: how phones are becoming open-source by minthd on Saturday July 11, 2015 @04:58PM (#9871543)
The languages that fit the web need: extreme simplicity(i.e garbage collection, very high abstraction, very simple to learn) and rapid prototyping(i.e. dynamic typing).

The languages that fit micro-controllers will need - no garbage collection(to support real-time), abstraction without loss of performance, high-reliability(it's expensive to fix bugs after shipment).

Those differing requirements tend to produce different languages. For example , rust - which embedded developers find very interesting, didn't seems to attract much attention by web developers.

Re:After Moore's Law: how phones are becoming open-source by mbertschler on Saturday July 11, 2015 @03:23PM (#9871202)
It will be really great when microcontrollers are made in todays advanced nodes. Besides becoming more powerful their low power consumption will be ideal for new applications like IOT and sensors everywhere.
Re:After Moore's Law: how phones are becoming open-source by yuhong on Sunday July 12, 2015 @03:53AM (#9872855)
I expect that DES, 64-bit KASUMI, or other crypto cracking ASICs will probably want to use 14nm, right?