News for hackers. Stuff that matters.
Re:Just Wear Headphones by calpaterson on Monday June 22, 2015 @10:24AM (#9758501)
It might be helpful if you could offer citations for that. I find it hard to judge these competing claims
Re:Just Wear Headphones by dsr_ on Monday June 22, 2015 @11:06AM (#9758816)
Here's OSHA and NIOSH:

https://www.osha.gov/SLTC/noisehearingconservation/

TL;DR: NIOSH would recommend limiting the 8 hour exposure to less than 85 dBA. At 100 dBA, NIOSH recommends less than 15 minutes of exposure per day. NIOSH also recommends a 3 dBA exchange rate so that every increase by 3 dBA doubles the amount of the noise and halves the recommended amount of exposure time.

15 minutes is 7 doublings away from 32 hours, i.e. constant exposure. So, 100-(7*3)= 79dBA is safe, and 82dBA is safe for long-term exposure, and 85dBA is a limit at which you should have hearing protection.

Re:Just Wear Headphones by BFay on Monday June 22, 2015 @10:45AM (#9758654)
None of that comment seemed unreasonable to me - I've had large over-ear sets of headphones that require me to turn the volume up pretty high. It takes more to drive them, that's why some people own headphone amps.

Compare that to IEM's like the Sennheiser cx 300 - 5% of max volume at my computer might be too loud.

And it would surprise me if headphone usage at reasonable volumes is worse than going to loud concerts, even if you use headphones for long periods of time. If I'm at a concert or a loud bar for an hour or two, my ears feel really fatigued afterwards, everything seems quieter. I've never turned up headphones loud enough to experience that.

Re:Just Wear Headphones by seanp2k2 on Monday June 22, 2015 @02:57PM (#9760431)
If anyone is curious, this is what the sensitivity measurement is on headphones: https://en.wikipedia.org/wiki/Headphones#Sensitivity

TL;DR "The sensitivity of headphones is usually between about 80 and 125 dB/mW and usually measured at 1 kHz." and note that since dB is logarithmic, every 6dB is 2x the energy (human-perceived "doubling of volume" is typically ~10dB; see also: https://en.wikipedia.org/wiki/Fletcher%E2%80%93Munson_curves )

Re:Just Wear Headphones by gcv on Monday June 22, 2015 @11:05AM (#9758800)
Sure. I added some reading material links to my comment. The Rane document has an OSHA safe sound levels table at the end, a good reference. Keep in mind that the dB scale is logarithmic if you want to crunch numbers on device power, headphone sensitivity and impedance, and resulting SPLs.