Re:The Batteriser Explained
by Terr_ on Monday June 08, 2015 @03:19PM
(#9681557)
There's also an efficiency loss from the extra circuitry, particularly when the batteries are good enough that there's no benefit yet.
[ Parent
| on HN ]
They could add a bypass circuit around their boost converter, which would give virtually 100%[1] efficiency until the booster actually fires up.
Something like the TI TPS61291[1] draws only 15nA in bypass operation, and maybe 85% efficient in boost.
[1] The bypass switch itself will have some resistance, the part below is ~1.2ohm, which might be significant depending on your load.