Larger, slower props are required for maximum efficiency in a hover. The pressure above the prop is never more than one atmosphere, so "suction" is limited unlike when the airplane is flying at a high speed and air is continually forced into the inlet nozzles.
The 800N thrust of those engines is measured at cruising speed, when the only opposing force is drag and the intake and exhaust velocities are very similar. It produces much less thrust starting from zero velocity on the runway, when the opposing force is the inertia of the aircraft.
Jet airplanes, RC electric ducted fans, and jet ski watercraft have similar thrust-vs-velocity response, and are better for their intended purpose as a result - but that doesn't help for octocopters. However, tugboats use a ducted fan for the opposite effect. I am investigating the use of accelerating-configuration ducted fans or "Kort Nozzles" for octocopters.
And yes, the insane reaction time of miniature brushless electric motors is largely what allows these craft to function; you would want variable-pitch props or vectored thrust to make a turbine or internal-combustion craft work well, but that's not the reason they aren't used.
There's nothing preventing one from using a single turbine for lift (or a cluster of them near the center of mass) and some sort of reaction control system (possibly taking bleed air) for stabilization and attitude control.
I've thought about that for a while, didn't actually went as far as doing a feasibility study or actually building the thing.
I mean, a single AMT Nike has 800N/80kg of thrust (-11kg for the turbine weight), so eight of these should provide roughly half a ton of load capacity?