Re:"A significant amount of skill with a soldering iron and ...
by chengmi on Thursday January 03, 2008 @03:19AM
(#94470)
From his blog: "I wasn't able to solder cable to the connector without shorting (the pins are 0.5mm apart!), so in the end I removed most of the pins, soldered short wires to the removed pins and inserted those I needed back into the connector."
You most certainly can solder wires to a connector with 0.5mm pitch without shorting anything. It takes a magnifying glass, a good soldering iron, and a very steady hand. Interesting article, though!
You most certainly can solder wires to a connector with 0.5mm pitch without shorting anything. It takes a magnifying glass, a good soldering iron, and a very steady hand. Interesting article, though!