Re:Android’s 10 Millisecond Problem explained
by cnvogel on Thursday April 16, 2015 @02:17PM
(#9389757)
Music or video production studios typically have a central clock, so for this use-case the sample rates should be perfect. But even if the input and output devices are on perfect clocks, with NTSC (59.94 Hz), you'd need a very odd number of samples per video frame in your software, if your processing would happen at a integer fraction of the video frame rate.
[ Parent
| on HN ]
Re:Android’s 10 Millisecond Problem explained
by nitrogen on Thursday April 16, 2015 @08:11PM
(#9391560)
Do you know whether studios use 48000Hz with 59.94fps or 48000/1.001 ≈ 47952Hz? Does converting from 24fps film to 23.976fps Blu-ray require resampling the audio? Or are films recoded at 48048Hz and then slowed to 48000 for consumer release?
The short answer is that it's complicated. Digital film (DCP) is typically 24 fps, asirc -- and that doesn't go well into 60, or 50. And the difference is enough that you need to drop a frame and/or stretch the audio. And sometimes this doesn't go so well.
There's a relatively recent trend to try and record digital all the way, and this is also complicated. Record at 24 fps? At 30? At 60? 60 fps 4k is a lot of data. And sound is actually the major pain point -- video frames you can generally just drop/double, speed up/down a little to even things out. But 24 fps to 60 fps creates big enough gaps that audio pitch can become an issue.