I'm not sure how good is the test as it depends on the IO levels of the host where the VM instance is running.
This is a 1GB Debian Wheezy instance with regular HDD in Memset [1]:
dd bs=1M count=1024 if=/dev/zero of=test conv=fdatasync
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 17.7142 s, 60.6 MB/s
I checked the host and its load is average. DO's 33.6 MB/s sounds poor.[1] disclaimer: Memset hosting is my employer, I built some of this; but this is an honest test (personal VM running several services).
EDIT: formatting
EDIT 2: same test on a VM with SSD disk:
dd bs=1M count=1024 if=/dev/zero of=test conv=fdatasync
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 3.48953 s, 308 MB/s
Again, the host has average load.Did the same test on a VM I have in DigitalOcean...
( Ubuntu, 512 MB droplet )
~# dd bs=1M count=1024 if=/dev/zero of=test conv=fdatasync 1024+0 records in 1024+0 records out 1073741824 bytes (1.1 GB) copied, 2.35872 s, 455 MB/s
VULTR 2 GB INSTANCE dd bs=1M count=1024 if=/dev/zero of=test conv=fdatasync
DIGITALOCEAN 2GB INSTANCE