Re:Tweel – Airless Wheel
by bjackman on Tuesday February 24, 2015 @07:42AM
(#9100172)
Love the comment about water evacuation through holes reducing hydroplaning.
I'd love to know what's holding these back. Perhaps it's just a higher cost:MTBF ratio, and one day it will surpass regular tyres. Perhaps they're really truly better, but pneumatic tyres are just Good Enough. Perhaps there's a fundamental flaw in the idea that only experts can see. Probably we'll never know.
Re:Tweel – Airless Wheel
by cc438 on Tuesday February 24, 2015 @09:06AM
(#9100541)
They have a terrible NVH (noise, vibration, and harshness) profile. The deformation of the tire in motion produces significantly more noise than a traditional tire due to the larger amount of material and greater stiffness required for the support structure. These high levels of "tire noise" are the main hold up for consumer applications as the tweel has caught on in low-speed applications when durability outweighs cost considerations.
Re:Tweel – Airless Wheel
by pavel_lishin on Tuesday February 24, 2015 @11:02AM
(#9101383)
Wasn't there a lot of concern awhile back about electric cars being too silent, and therefore dangerous to pedestrians, etc who can't hear them coming?
Maybe noisy wheels are a better solution than playing artificial engine noises through loudspeakers.
Re:Tweel – Airless Wheel
by sp332 on Tuesday February 24, 2015 @11:14AM
(#9101497)
They have the same problem, which is that electric cars are only silent at low speeds. At high speeds, the tires already make plenty of noise. The problem with electric cars being quiet at low speeds is that's when you're most likely to encounter pedestrians. But that's just when these tires would make the least noise, so they probably won't help.
Re:Tweel – Airless Wheel
by TehCorwiz on Tuesday February 24, 2015 @08:32AM
(#9100373)
The last time I read about these the main problems were replacement cost and ride comfort. It appears that Michelin already offers them in applications where ride comfort isn't an issue, such as riding mowers and skid-steer loaders.[0]
Re:Tweel – Airless Wheel
by wmeredith on Tuesday February 24, 2015 @11:18AM
(#9101535)
The fundamental flaw of the twheel is well known: something gets stuck in the spokes (mud, gravel, etc) and they go out of balance. At highway speeds: best case scenario is annoying vibration; worst case scenario is dangerous loss of traction and/or broken suspension components.
Michelin currently has a factory that makes these for low speed industrial applications (e.g. a skid loader). We probably won't see them on dealership lots any time soon.
Re:Tweel – Airless Wheel
by zck on Tuesday February 24, 2015 @11:29AM
(#9101617)
Can't you just cover the wheel? Certainly I would think the sides would be easy to cover; the tread itself might be more difficult, but unless I'm missing something, having the tread be open is not a required part of this design.
Basically I'm imagining something that looks like a regular tire, but inside has the tweel. In addition to the tweel's benefits, you also don't have anyone even notice you're using something different.
Re:Tweel – Airless Wheel
by Cybernetic on Tuesday February 24, 2015 @01:18PM
(#9102430)
Perhaps something similar to spoke-less bicycle wheels, that have a cover? I don't seem them very often, but they seem to be standard on bikes in indoor track races, e.g., Summer Olympics.
Re:Tweel – Airless Wheel
by greggyb on Tuesday February 24, 2015 @09:00AM
(#9100513)
From my prior reading, there are heat issues at speed and when they tested at highway speeds (if I recall correctly, on an Audi) there was alarming vibration past ~50mph.
I would buy these very quick of they entered the market.
Re:Tweel – Airless Wheel
by ch on Tuesday February 24, 2015 @08:45AM
(#9100430)
This looks great, and has some very compelling benefits. I'd be curious to know what their performance is likewhen caked in road ice like we get here in the northeast after a few rounds of snow clearing and melt and freeze cycles (the prototype on the Wikipedia shows the spoke pattern to be very deep).
Re:Tweel – Airless Wheel
by baldeagle on Tuesday February 24, 2015 @10:03AM
(#9100874)
just reads like a press release. All the positives are very positive, and the negatives are both very mild and eplained away as solved in later versions. For example they mention minde deflection and the possibility of reducing hydroplanning but do not mention noise or vibration issues at highway speeds.
I'd love to know what's holding these back. Perhaps it's just a higher cost:MTBF ratio, and one day it will surpass regular tyres. Perhaps they're really truly better, but pneumatic tyres are just Good Enough. Perhaps there's a fundamental flaw in the idea that only experts can see. Probably we'll never know.
Maybe noisy wheels are a better solution than playing artificial engine noises through loudspeakers.
Not convinced that it was ever produced, but still:
http://content.time.com/time/specials/2007/article/0,28804,1...
[0]:http://www.michelintweel.com/
Michelin currently has a factory that makes these for low speed industrial applications (e.g. a skid loader). We probably won't see them on dealership lots any time soon.
Basically I'm imagining something that looks like a regular tire, but inside has the tweel. In addition to the tweel's benefits, you also don't have anyone even notice you're using something different.
I would buy these very quick of they entered the market.