The amount of work the mechanical engineer designing the mechanisms went to, and the tiny, seemingly insignificant details that make such a huge difference in the end, were mindblowing. And this machine (a subassembly of a larger machine) had a target failure rate of no more than 1 jam per million cycles. Don't know that we ever achieved that, but we did come up with some clever automatic jam recovery algorithms. And then there was his description of the process the software should follow in order to properly dispense the units.
Debugging was interesting. I already had a fair amount of machine control experience before this task, but it was the first time I needed a high-speed video camera to debug my software! I discovered pretty quickly that in software I could optimize for throughput, or for reliability, but one was always at the expense of the other.
https://www.youtube.com/watch?v=cR4S8Bqjmsg
you can see the simple mechanism used on a similar vibratory feeder in a US plant to separate zipper pulls facing in the wrong direction.
There are common tricks used with vibratory feeders to separate parts. That part is wider at one end than at the other, and has a big hole and a small hole. There are standard vibratory feeder tricks to separate them.
Custom vibratory feeder accessories, though, have to be designed and built, which may be beyond this small shop. They're making very low end zipper pulls, made of pot metal (zinc and aluminum) and casting them. Pot metal is really easy to cast, but too brittle for that part. Expect those zipper pulls to break. (There are many videos on YouTube on how to replace broken zipper pulls.) Better zipper pulls are stamped from sheet metal - plated steel, aluminum, brass.
The video is from a small shop that's barely surviving. It sucks making small parts like that, because your supplier and customer are both bigger than you and can squeeze you on price.
YKK, the world's largest zipper manufacturer, ("Small part, big difference") offers the same pull, with no alignment projection. YKK leads in the business because their zippers are better. There are tough engineering problems in zipper manufacturing. They don't talk about those. There are lots of exterior pictures of YKK plants on the web. There are no interior pictures.