News for hackers. Stuff that matters.
Re:The Clock by jonathonf on Friday January 23, 2015 @08:11AM (#8934625)
Depending on the supply requirements, he might use voltage ripple as a reference.

With an unsmoothed rectified supply you get a nice "pulsed" input anyway:

http://falstad.com/circuit/#%24+1+5.0E-6+1.8479586061009856+...

Re:The Clock by smoyer on Friday January 23, 2015 @08:17AM (#8934652)
True but you'd expect that to be 120Hz rather than 60Hz.
Re:The Clock by dogma1138 on Friday January 23, 2015 @08:39AM (#8934728)
Use a diode so you only get half of the sin waves, that's 60hz which makes it very easy to build a clock off since you don't need to do any multiplications on the base clock frequency it self.
Re:The Clock by jonathonf on Friday January 23, 2015 @08:22AM (#8934666)
So you could: a) use a half-rectified supply b) halve the count.

A) would be easier. :)

Re:The Clock by smoyer on Friday January 23, 2015 @09:43AM (#8935035)
True ... not so good for efficiency and you'd need a bigger smoothing capacitor. (I'm assuming since this is all discrete, there's no need for a fully regulated power supply).
Re:The Clock by morcheeba on Friday January 23, 2015 @01:02PM (#8936249)
You'd want a fully regulated power supply for this, /especially/ because it's discrete. You want the LEDs to remain constant brightness, but, more importantly, you don't want an unregulated power supply to overvolt and destroy all this hard work.