While hardware design often has awkward constraints that make generalised abstractions tricky, there is still a lot that can be done to improve over Verilog or VHDL. I've been working in Bluespec for a couple of years now, and the difference is night and day. Having a modern type system in our HDL makes experimentation and iteration so much easier.
And reading about these projects, one gets the impression chisel was critical for them.
[1]https://chisel.eecs.berkeley.edu/chisel-dac2012.pdf
[2]http://www.eetimes.com/document.asp?doc_id=1324759
[3]http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=654588...
And that's it. That is the ONLY place where an FPGA makes sense--"I'd like to have an ASIC, but I can't afford the NRE."
There is no technological axis in which an FPGA is superior to anything.
"FPGA's are hot and slow" - compared to a full custom IC? Sure. FPGA's improve with every process generation (like all silicon devices) and an ASIC design won't intrinsically take advantage of those advances; an FPGA design that didn't meet it's power or thermal envelope 5 years ago might easily do so now, without incurring the NRE of the ASIC - add to that the fact that the first stage of the ASIC design can be prototyped via the FPGA, and you have a viable product without the risk of a bad ASIC.
I've been involved in converting several Virtex-2 designs to newer devices - the huge reduction in power and increase in available logic has led to some extremely impressive gains. There is work to do in such a conversion, but it is understood work - there's no real mystery to updating the CoreGen components.
Agree it is a useless article though, because digital logic design is not programming (it is architectural work). There is no 'abstracting' that away - all attempts thus far have failed miserably (Vivado HLS, for example, turns out designs that work but are HUGE compared to what even a passable designer can do).