It's not really aimed at security; that's not a priority for consumer hard disks where cost/GB is the main criterion. It's more a question of three factors:
- laziness: publishing quality documentation costs money - fear of competition: publishing info also helps your competitors - latency: given that far more computing power can be fitted on a chip, and the relative cost of sending some data versus processing it locally has changed dramatically, a modern computer is a distributed system cooperating over network-like links.
Re:Hard disk hacking
by userbinator on Thursday November 27, 2014 @09:39AM
(#8667426)
True, I was mostly referring to design security (the competition factor), but most HDDs do support setting a password which is not hard to get around (the data itself isn't encrypted using it, since that would introduce some other problems with being able to change the password.) Consumer disks are also better not encrypting by default, as otherwise the whole contents could be lost easily and unrecoverable if the key is unreadable - and for the majority of users and data, the availability of the data is more important than its absolute security.
Although they're largely obsolete today, for many years the most well-documented and open storage device that could be connected to a standard PC was the floppy drive. The physical format was standardised by ECMA, the electrical interface to the drive nothing more than analog read/write data and "dumb" head-positioning commands, the controller ICs (uPD765 and compatible) interfacing it to the PC were based on simple gate arrays (no need for any firmware), and all the processing was otherwise handled in software. The documentation for the earliest PCs included the schematics for the drive, and the ICs on it were documented elsewhere too - e.g. https://archive.org/details/bitsavers_westernDigorageManagem... A lot of the technical details of early HDDs were relatively open too. I've interfaced a floppy drive to a microcontroller before, and being able to see how the whole system works, to understand and control how data is read/written all the way down to the level of the magnetic pulses on the disk, is a very good feeling.
(Many earlier systems that came before the PC, like the C64, also had more-or-less completely open storage devices, enabling such interesting things as http://www.linusakesson.net/programming/gcr-decoding/index.p... )