We've also implemented some adaptive algorithms to optimize the battery life in our beacons, so with conservative settings they should work for 5+ years now.
I was excited when I saw your indoor SDK, but it's too simplistic and not realistic enough for the production apps we have and are building (walking around and mapping every single room in a hospital is untenable).
I don't mean to bash your company at all here, so I'm sorry if this comes off that way. I also found that almost all clients scoff at ~$33/beacon when you're pitching something in the 10,000 beacon range. Even then, for $30/beacon I can get ones that run off the wall circuit and last until that's off (for all intents and purposes, longer than 5 years).
Obviously at 10,000 beacons we're talking enterprise pricing, but even if you were to get that to around $5 that's still too much for what's essentially a CR2032 battery and a tiny radio chip.
I'm excited to see where Estimote takes beacons though, since they seem to be doing the most R&D type pushes with this technology compared to the other manufacturers.
Indoor SDK is still in very early phase, but we're pushing very hard to roll out a series of updates with new features like multiple rooms support, cloud integration and even better accuracy, so you can expect more comprehensive solution in the near future.
And if you're interested in bigger deployments we also offer beacons in bulk quantities with much better pricing.
We're treating R&D very seriously as we're thinking of beacons as much more than simply hardware. There's still a lot of ideas to explore and we try to support the community as much as we can, so I hope you'll give it another chance.
Thanks again for sharing your thoughts. That's extremely important to us and makes it possible to address issues people have with beacon technology ASAP
I hope that some OS level improvements give us some free reliability and performance increases. Supposedly Android recently got some updates re: beacons.
It's most probably a combination of all random variables (EM interference, beacon hardware, software, phone BLE antennae, etc) that makes it so frustrating and practically non-deterministic.
Why don't you fit the beacons on the ceiling?
I would be much happier paying the same amount for something that looks like a AA battery and will last a few years.
no affiliation. haven't tested the units yet. [1] http://www.bluecats.com/
- Estimated battery life was estimated very poorly.
- Nobody likes things they didn't ask for getting sent to their phone.
- Indoor navigation that relies on iBeacons only is going to shoot you in the foot. I recommend www.indoo.rs as the only solution that got close to what we needed (though it's still pretty darn immature).
- Speaking of indoor navigation, you need a ton of points to do it well (whether that's beacons or wifi routers, you decide).
- Using beacons for granular location-aware uses might as well go out the window if you're looking for accurate and precise readings around ~1-3ft.
- Did I mention power yet? All of the beacons we started with around 9 months ago have dead batteries. Even with conservative power modes set. The only beacons that don't are RadBeacons USB sticks that plug into wall outlets. And that's only because they don't have batteries.
I really, really want them to be good. But they die too quickly, and don't provide granular signal data. Hold the phone between you and the beacon and get a decent signal, then turn 180 degrees so that you are between the phone and the beacon. Apparently you've moved 45ft.