Re:Impossible Bottles
by jws on Monday September 28, 2009 @10:30PM
(#849684)
I suspect if the lower brass piece were removed from the upper loop both pieces fit in. Then just reattach them. I'd do that with clever placement of tiny magnets.
Sure, it doesn't work as a lock anymore, but who can tell?
Actually, now that I think about it.. it does work as a lock. I mean, how often to people pull on a lock to see if it is really a lock? Plus, you can't forget your key.
Re:Impossible Bottles
by electromagnetic on Monday September 28, 2009 @10:38PM
(#849693)
I've dismantled a padlock before, different type, but it still worked. The one I dismantled I had to use a heat gun to expand the casing and a heat sink to keep the interior cool.
You can actually assemble things inside a bottle using callipers and dividers, they generally have much better length on them than a pair of tweezers and are much easier to pick up than an adequate pair of forceps. I wouldn't doubt some of the narrow necked items could be assembled using forceps.
Re:Impossible Bottles
by electromagnetic on Monday September 28, 2009 @10:33PM
(#849689)
Easy, the padlock used is a master lock type. By removing the bar from the lock (which easily fits through the neck in any direction) you can insert the mechanism half of the lock sideways (where it is narrow enough to fit through) and then you reassemble the lock inside.
Re:Impossible Bottles
by gjm11 on Monday September 28, 2009 @07:29PM
(#849449)
One obvious method would be to make the bottle in two halves and join them together with the contents in place. Either split it down the middle or -- this might be easier to do without it being noticeable and without damaging the contents when joining the pieces - make everything apart from the bottom of the bottle in one piece and attach that at the end.
Whether that's actually what they do, I don't know.
Re:Impossible Bottles
by yumraj on Monday September 28, 2009 @07:27PM
(#849445)
I would assume that one trick is to dismantle an object and slowly assemble it inside the bottle. However that won't work with things like baseball where I guess the lit match trick might work.
Re:Impossible Bottles
by jonshea on Tuesday September 29, 2009 @11:49AM
(#850590)
The bottle with the corkscrew on the inside is my favorite. My best guess is that the corkscrew handle, without the screw, was hung inside by threads. The cork-with-screw was then pressed into place, probably with some glue on the end of the screw. The handle could then be pulled onto the screw with the threads, and the threads pulled out of the bottle.
Re:Impossible Bottles
by detcader on Monday September 28, 2009 @07:16PM
(#849436)
I've heard about getting an egg into a bottle using a lit match inside the bottle (to mess with the pressure), but this is ridiculous... I wonder if that's how he does it.
Brilliant :-)
Sure, it doesn't work as a lock anymore, but who can tell?
Actually, now that I think about it.. it does work as a lock. I mean, how often to people pull on a lock to see if it is really a lock? Plus, you can't forget your key.
You can actually assemble things inside a bottle using callipers and dividers, they generally have much better length on them than a pair of tweezers and are much easier to pick up than an adequate pair of forceps. I wouldn't doubt some of the narrow necked items could be assembled using forceps.
It's certainly not easy to do, but it is do able.
Any idea how these are done? It's very secretive on the site.
Whether that's actually what they do, I don't know.
Heat the glass till it's soft like taffy, and put the item in the bottle.
The put the bottle in a mold, and press the glass back into shape, and let it cool.
http://www.kleinbottle.com/drinking_mug_klein_bottle.htm