News for hackers. Stuff that matters.
Re:Stanford engineer aims to connect the world with ant-size... by ars on Wednesday September 10, 2014 @02:40AM (#8295220)
> Presumably they rebroadcast to neighbouring nodes;

Unless you have a directional antenna, which these don't, you can not possibly scavenge power and simultaneously hope to increase the range by rebroadcasting.

So rebroadcasting is pointless, these simply communicate with the base station.

But what do they do? I mean it's nice to communicate, but you have to have something to say.

Re:Stanford engineer aims to connect the world with ant-size... by bradfa on Wednesday September 10, 2014 @07:55AM (#8296102)
The power scavenging circuit looks to not be the same frequency as the communications radio circuit due to antenna size differences. Likely it's harvesting power from 2.4 GHz or similar frequency and then using the higher (24 GHz-ish) band for comms. With a decent meshing protocol this would be quite interesting, although latency with many many short hops will be horrid.
Re:Stanford engineer aims to connect the world with ant-size... by bravo22 on Thursday September 11, 2014 @01:20PM (#8303801)
The antenna is way too small for 2.4GHz. It makes sense for higher frequency (60GHz or whatever he said in the video). You can power harvest RF waves straight up but what you absorb gives you very little to rebroadcast again.

There are others doing work on this for sensors you could embed into say a wall to give you the pressure reading of the concrete (a simple piezo say) but those usually modulate an RF wave (similar to NFC) instead of rebroadcasting.

Re:Stanford engineer aims to connect the world with ant-size... by bravo22 on Thursday September 11, 2014 @01:18PM (#8303796)
I agree about scavenging. It is inefficient and doesn't make much sense.. They're likely rebroadcasting but at a much much lower power level so the next hop is much closer than the first.