Re:Lost Lessons from 8-Bit BASIC
by vidarh on Tuesday September 02, 2014 @05:13AM
(#8256504)
Absolutely. It invited it to the point that for many of the 8-bit computers, to load a game you'd typically execute one or more BASIC commands that were no different in principle from any other.
On the C64 you might do "just" LOAD and RUN for a game on tape. Or you might do LOAD "$",8 (load the special directory 'file' from device 8 - the first floppy drive); LIST (to see the contents of the floppy), and then LOAD "somefile",8 / RUN to load and run your chosen program.
You were not just invited to play with BASIC. You were forced to at least acknowledge it and learn a few commands to do anything. So even if the command prompt did not intrigue you, perhaps the few BASIC commands you needed to load your games did.
And if you did a "LIST" on those games or programs you loaded you might be surprised by a full or partial BASIC listing (noteworthy examples: Sid Meier's "Pirates!" for the C64 was a mix of BASIC and machine code; though still a nightmare to modify for the curious as the machine code extended down into the BASIC memory area, which meant that modifying the tokenized length of any lines would case part of the machine code to get moved - or overwritten - and everything would break), or you might see the mysterious, to a beginner "SYS some-address" indicating a jump to a machine code. My first forays into assembly programming came after spending lots of time seeking information to figure out that curious thing.
Couple that with magazines with type-in program listings, in between game reviews and other stuff, and with manuals that pretty much started with the assumption you wanted to learn to program. I don't think people who grew up after this era really understand just how impossible it was for computer users to at even regularly have source code trust into our faces, even for those not seeking it out.
For example the VIC 20 manual that can be found at [1] (warning: large PDF), or the C64 manual at [2]. The VIC-20 manual starts with:
"You are about to meet a friendly computer! Friendly in price, friendly in size, friendly to use and learn on and experience. Most important - you don't have to be a computer programmer, or even a typist, to use it!"
.. and goes on to explain how easy it is to learn programming, for anyone, and what chapter to turn to to learn various aspects. First halfway through the preface, it starts to address users that don't want to program...
On the C64 you might do "just" LOAD and RUN for a game on tape. Or you might do LOAD "$",8 (load the special directory 'file' from device 8 - the first floppy drive); LIST (to see the contents of the floppy), and then LOAD "somefile",8 / RUN to load and run your chosen program.
You were not just invited to play with BASIC. You were forced to at least acknowledge it and learn a few commands to do anything. So even if the command prompt did not intrigue you, perhaps the few BASIC commands you needed to load your games did.
And if you did a "LIST" on those games or programs you loaded you might be surprised by a full or partial BASIC listing (noteworthy examples: Sid Meier's "Pirates!" for the C64 was a mix of BASIC and machine code; though still a nightmare to modify for the curious as the machine code extended down into the BASIC memory area, which meant that modifying the tokenized length of any lines would case part of the machine code to get moved - or overwritten - and everything would break), or you might see the mysterious, to a beginner "SYS some-address" indicating a jump to a machine code. My first forays into assembly programming came after spending lots of time seeking information to figure out that curious thing.
Couple that with magazines with type-in program listings, in between game reviews and other stuff, and with manuals that pretty much started with the assumption you wanted to learn to program. I don't think people who grew up after this era really understand just how impossible it was for computer users to at even regularly have source code trust into our faces, even for those not seeking it out.
For example the VIC 20 manual that can be found at [1] (warning: large PDF), or the C64 manual at [2]. The VIC-20 manual starts with:
"You are about to meet a friendly computer! Friendly in price, friendly in size, friendly to use and learn on and experience. Most important - you don't have to be a computer programmer, or even a typist, to use it!"
.. and goes on to explain how easy it is to learn programming, for anyone, and what chapter to turn to to learn various aspects. First halfway through the preface, it starts to address users that don't want to program...
[1] http://www.classiccmp.org/cini/pdf/Commodore/VIC-20%20User's... [2] http://www.commodore.ca/commodore-manuals/commodore-64-users...